driver

Hi, I write a driver of LCD, witch use SPI and GPIO and works on kernelspace. Source code is available on my github: https://github.com/mattpro/freebsd_test2/blob/master/lcd.c I'll try to test spi but I find strength things. When I load module into kernel: kldload ./lcd.ko I see that init...

I have several questions about hardware driver module loading. When I run pciconf -l -v, I see output for the various devices in my system, like so: hostb0@pci0:0:0:0: class=0x060000 card=0x3084103c chip=0x35808086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device =...

Two years ago i bought a WLAN card model Bcm94352z with the BCM4352 Broadcom chipset to use it on macOS (Hackintosh). It turns out that the card worked properly on macOS but didnt work on Ubuntu nor on any Linux distro. 2 years later i managed to get it work on Linux by adding the "irqpoll" or...

Hello folks! On laptop Asus X55A touchpad is recognised as ps/2 mouse. In general it is usable, but touchpad-specific options are unavailable ('tap-to-click', scrolling, etc). asus% freebsd-version 12.0-RELEASE asus% dmesg|grep psm psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED]...

I'm using the if_qlxgb kernel module to run my QLogic NC523SFP 10GbE NIC. However upon loading this module, and assigning an IP to it via ifconfig, the following error occurs: ql1: qla_hw_send: (nsegs[1, 42, 0x0] > Q8_TX_MAX_SEGMENTS) ql1: qla_dump_buf8: qla_hw_send: wrong pkt 0x2a dump start...

lspci (linux) 02:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe 02:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth I tried to install freebsd 11.2 but it does not detect my wireless network card. - I looked in another publication and they said that the RT3290 driver is...

===> Configuring for nvidia-driver-340-340.107 ===> Building for nvidia-driver-340-340.107 ===> src (all) make[6]: "/usr/src/sys/conf/kmod.mk" line 474: Could not find bsd.clang-analyze.mk make[6]: Fatal errors encountered -- cannot continue make[6]: stopped in...

Hello all, So I have been running FreeBSD and OPNsense as a VM's for some time now but due to changes I need to make internally I decided to repurpose an old portable to be the ONSense box, now I know this isn't the OPNsense forum but I believe my issue and question is more of a base system...

I always have to workaround problems with new media- and gaming-keyboards or mouses. I can't run them well enough for office-usage or gaming. I can't configure my keyboard-illumination and no media-keys are working, special keys are also not running. Very similiar to mouses, the old mouse-driver...

First time FreeBSD user here. I have a wireless network card with a rtl-8812ae chipset. I checked and it looks like this is supported by rtwn in 12-current, but not 11.1. I’d prefer to not use the development version if possible for my first time, but a lack of wifi really is a dealbreaker (I...

Hi, I'm new to FreeBSD and just performed my first install. I'm following the handbook and am now at chapter "5.4. Xorg Configuration". I've already successfully installed x11/xorg. I'm trying this as the root user, but get the same results as a regular user (who is in the wheel group). I've...

Hi, I am building firewall using pfsense 2.4.0-BETA (11.0-RELEASE-p11) on Dell E6330, with Microsoft USB Ethernet adapter. Even though it is not on the compatible HW list, I am able to bring it up as LAN interface, and the firewall works properly with multiples PCs on the LAN. However, the...

hi aftet read a lot of post in your magnific forum all that give me a courage to inatll FreeBSD in my hard belong to arch. Before that i take time in virtualbox before i did this step. realy i did it and i'm very excited. but after installed it i faced a problem that xorg dosn't work well i...

Is anyone familiar with the d_poll function of the character devices? #include <sys/conf.h> typedef int d_poll_t(struct cdev *dev, int events, struct thread *td); I know it is the one being called when a device file was passed into select(2) system call, but how do the "events" argument and...

I would like to write a FreeBSD kernel module that could accept some arbitrary interrupts and upon receiving these interrupt, output some data to an arbitrary device. Currently, I'm facing several issues: How would I acquire interrupts through a specific IRQ? On Linux there is the...

Hello everyone :) I'm a fresh user of FreeBSD from Windows. I installed the version 10.3 on my new computer by livecd which I burnt. I need to install a driver for my network card (Qualcomm Atheros - QCA6174), but this is ath10k and the FreeBSD port is not ready actualy. Can I install...

Hello, I'm new to the forum so hi everyone! I'm a student in IT & telcommunications from France. I currently use Archlinux but I am thinking about switching to a BSD system. At the moment, the only thing that hold me back is that I think that there is no driver for my RME hammerfall II...

How can I cross compile a specific driver for BeagleBone Black (BBB). e.g. /usr/src/sys/modules/usb/smsc/? I tried make TARGET_ARCH=armv6 but I found out that this is not correct. Am I missing something?

Dear FreeBSD Support forum, I didn't want to ask for help about this topic as there is No Supported Hardware involved, but I will appreciate some help, the scenario is like this: Have a Dell Precision T7400 with FreeBSD RELEASE 11 installed and I did try to setting up a few wireless USB cards...

Dear FreeBSD Support Team: Last year I upgraded the hardware in this Samsung NP300V4A by adding a 500 GB SSD and 12 GB RAM. So I decided to install FreeBSD 10.3, in that try I had problems installing it from the USB due to display errors at the moment of enter option 1 in the splash screen of...