driver

Specs: Ryzen 3960x, Radeon RX 5700, 13.0-RELEASE-p3 Problem is occuring inside jails. When I try to launch a GUI app (Falkon, Blender, etc), the app launches, but with significant lag for moving objects with mouse, videoplayback, and consuming large CPU resources even at idle...

Hi, I am compiling a driver for sr-iov. The /usr/src/sys/amd64/conf/GENERIC has the PCI_IOV option specified by default. options PCI_IOV # PCI SR-IOV support I have the following in the driver code #ifdef PCI_IOV #include <sys/nv.h> #include <sys/iov_schema.h>...

I'm using KDE with the drm-kmod graphics driver and just experienced a hang issue. I'm just wondering if I switch over to Xfce, would it work without this drm-kmod driver? My gut feeling is it would require the same hardware drivers. But however, I remember that many years ago things were much...

Something terrible happened. My FreeBSD PC (v. 13) hanged. Upon rebooting and examinig, it looks like the graphics driver is the culprit: (above error message is found in /var/log/messages, and typed (because the PC's network is not connected) Any thoughts about this? Or since this is...

I'm trying to configure my wireless network card and it is identified as none2@pci0:0:21:3: vendor = 'Intel Corporation' device = 'Wi-Fi 6 AX201' The "none" means there is no driver? I think found this confirming that it is not yet supported...

I'm receiving a MUNBYN ITPP941 label printer next week, and as it turned out, it's one of the most common label printers available globally under at least three different brand names (Beeprt, Rollo, Munbyn). There is a Linux CUPS driver package available for download...

My computer has HD 8000 series graphics known as Kabini. It did not work with FreeBSD after trying suggestions from the Handbook and forum HowTos so I tested with GhostBSD. The main difference is kbd_list="/boot/modules/amdgpu.ko" in rc.conf (there are 24 kabini modules). Now it works. I...

So print/epson-inkjet-printer-escpr is available as a port, but not print/epson-inkjet-printer-escpr2, which newer Epson printers require. The current RPM source package from the Epson website: epson-inkjet-printer-escpr2-1.1.32-1lsb3.2.src.rpm Anyone willing and able to port that one, which...

I am wondering if it is possible to use a Linux printer driver for CUPS that contains a filter program binary in FreeBSD. Specifically this is about the MUNBYN ITPP941 label printer for which the Linux CUPS driver can be downloaded here. That driver consists of a Beeprt.ppd and a...

Hello friends, I have a TrueNAS 12.0 server which runs with no GUI. I plugged in Nvidia GTX 1050Ti to it in order to use in ffmpeg. After plugging in pciconf -vl gave me the following output vgapci0@pci0:2:0:0: class=0x030000 card=0x85d11043 chip=0x1c8210de rev=0xa1 hdr=0x00 vendor...

Let me apologize upfront if this is too much of a basic question. Sure there are enough resources out there for me to figure this one out by myself. But, I am complete newbie to BSD Unix, and some guidance may help me to speed up the process. I am trying to install FreeBSD (13.0) in my new PC...

More of a PSA than actual thread. Read the following links and share your thought. This matter is near dear to my heart. Also if you have specific technical suggestions please, head over the mailing list, and share your opinion by reply/email over there. Quote the TL;DR from the original email...

As a reaction to Apple's choosing not to support 'ancient' hardware, and in line with my slow migration to bsdland, I'm upgrading my mid-2010 MacPro (with its 12-2.93GHz cores and a measly 32GB ram) to FreeBSD 12.1. The install went flawlessly. However, when I tried kldload radeonkms or amdgpu...

Hi, I'm new in FreeBSD, I like the OS and I'm installing it on many computers. But unfortunately in this case I have a problem with this computer that I'm using. The computer specs are these: AMD Athlon 64 3000+ Nvidia FX 5700 x2 512 MB DDR RAM 40GB IDE. Using FreeBSD 12.1 Release-p6 and updated...

pciconf -lv outputs this none0@pci0:0:12:0: class=0x028000 card=0x02a48086 chip=0x31dc8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' class = network /boot/loader.conf # intel nuc(my PC) wifi if_ath_load="YES" if_wi_load="YES" if_iwm_load="YES" iwm7265fw_load="YES"...

Hello, I installed FreeBSD 12.1 on my desktop, which has a TP-Link TL-WN881ND, which in itself has the Realtek RTL8192EE. I went through the handbook and found that (unless I am missing something), I should use the XP drivers via ndisgen as I did not find a driver anywhere in the docs or...

Hi, I am using Acer Aspire E1 V5we2 and trying to configure my touchpad. My touchpad is not recognised by the system, as it shows PS/2 generic. I tried to use synaptics but it still not working. I can't even copy paste here the code text so will send wgetpaste links. my...

Hi forum I'm new to FreeBSD and having version 11.3 on GA-H87N-Wifi motherboard. Most things working as intended, except the WLAN. Does anybody know whether there's an Intel (?) driver that can solve this problem ? TIA's for any tips or clues.

Hello everyone, I'm running FreeBSD 12.1-p2 on an old Dell XPS M1330 laptop. The video card is an old nVidia GeForce 8400M GS, and everything use to work fine with driver "nvidia-driver-304-304.137_6". A few days ago I installed the latest system updates, and now X.org stopped working. By...

My desktop PC has an Intel i5-4690k on an Asus UEFI Motherboard with an Nvidia GTX970 GPU. It has 3 monitors connected through said GPU. Normally I run Windows but I'd like to boot into a FreeBSD 12 desktop environment more often from my other hard drive. The problem I regularly run into is that...