NanoPI R5S and FreeBSD 14

Hi, current up to date. patch applied.

---<<BOOT>>---
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
WARNING: Cannot find freebsd,dts-version property, cannot check DTB compliance
Copyright (c) 1992-2025 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 15.0-CURRENT #0 main-n275440-91bae242bc54-dirty: Sat Feb 15 10:15:54 -03 2025
root@R5S-dev:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
real memory = 4292780032 (4093 MB)
avail memory = 4155334656 (3962 MB)
Starting CPU 1 (100)
Starting CPU 2 (200)
Starting CPU 3 (300)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
ofw_firmware0: <OFW Firmware Group> on ofwbus0
rk_grf0: <RockChip General Register Files> mem 0xfdc20000-0xfdc2ffff on ofwbus0
rk_grf1: <RockChip General Register Files> mem 0xfdc50000-0xfdc50fff on ofwbus0
rk_grf2: <RockChip General Register Files> mem 0xfdc60000-0xfdc6ffff on ofwbus0
rk_grf3: <RockChip General Register Files> mem 0xfdc80000-0xfdc80fff on ofwbus0
rk_grf4: <RockChip General Register Files> mem 0xfdc90000-0xfdc90fff on ofwbus0
rk_grf5: <RockChip General Register Files> mem 0xfdca0000-0xfdca7fff on ofwbus0
rk_grf6: <RockChip General Register Files> mem 0xfdca8000-0xfdcaffff on ofwbus0
rk3568_pmucru0: <Rockchip RK3568 PMU Clock & Reset Unit> mem 0xfdd00000-0xfdd00fff on ofwbus0
rk3568_cru0: <Rockchip RK3568 Clock & Reset Unit> mem 0xfdd20000-0xfdd20fff on ofwbus0
rk3568_cru0: cannot get parent at idx 0
rk_grf7: <RockChip General Register Files> mem 0xfdc70000-0xfdc70fff on ofwbus0
rk_grf8: <RockChip General Register Files> mem 0xfdcb8000-0xfdcc7fff on ofwbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
regfix2: <Fixed Regulator> on ofwbus0
regfix3: <Fixed Regulator> on ofwbus0
regfix4: <Fixed Regulator> on ofwbus0
regfix5: <Fixed Regulator> on ofwbus0
regfix6: <Fixed Regulator> on ofwbus0
regfix7: <Fixed Regulator> on ofwbus0
regfix8: <Fixed Regulator> on ofwbus0
rk_otp0: <RockChip OTP> mem 0xfe38c000-0xfe38ffff on ofwbus0
simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xfdd90000-0xfdd90fff on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
smccc0: <ARM SMCCC v1.2> on psci0
rk3568_combphy0: <RockChip combo PHY> mem 0xfe830000-0xfe8300ff on ofwbus0
rk3568_combphy1: <RockChip combo PHY> mem 0xfe840000-0xfe8400ff on ofwbus0
rk3568_pciephy0: <RockChip PCIe PHY> mem 0xfe8c0000-0xfe8dffff on ofwbus0
rk3568_combphy2: <RockChip combo PHY> mem 0xfe820000-0xfe8200ff on ofwbus0
gic0: <ARM Generic Interrupt Controller v3.0> mem 0xfd400000-0xfd40ffff,0xfd460000-0xfd4dffff irq 12 on ofwbus0
rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0
gpio0: <RockChip GPIO Bank controller> mem 0xfdd60000-0xfdd600ff irq 91 on rk_pinctrl0
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <RockChip GPIO Bank controller> mem 0xfe740000-0xfe7400ff irq 92 on rk_pinctrl0
gpiobus1: <OFW GPIO bus> on gpio1
gpio2: <RockChip GPIO Bank controller> mem 0xfe750000-0xfe7500ff irq 93 on rk_pinctrl0
gpiobus2: <OFW GPIO bus> on gpio2
gpio3: <RockChip GPIO Bank controller> mem 0xfe760000-0xfe7600ff irq 94 on rk_pinctrl0
gpiobus3: <OFW GPIO bus> on gpio3
gpio4: <RockChip GPIO Bank controller> mem 0xfe770000-0xfe7700ff irq 95 on rk_pinctrl0
gpiobus4: <OFW GPIO bus> on gpio4
rk_i2c0: <RockChip I2C> mem 0xfdd40000-0xfdd40fff irq 17 on ofwbus0
iicbus0: <OFW I2C bus> on rk_i2c0
fan53555_pmic0: <TCS4525 PMIC> at addr 0x38 on iicbus0
rk817_pmu0: <RockChip RK809 PMIC> at addr 0x40 irq 96 on iicbus0
rk_i2c1: <RockChip I2C> mem 0xfe5e0000-0xfe5e0fff irq 59 on ofwbus0
iicbus1: <OFW I2C bus> on rk_i2c1
rk_iodomain0: <RockChip IO Voltage Domain> mem 0xfdc20000-0xfdc2ffff on rk_grf0
rk_iodomain0: Cannot get property for regulator vccio2-supply
device_attach: rk_iodomain0 attach returned 6
rk_iodomain0: <RockChip IO Voltage Domain> mem 0xfdc20000-0xfdc2ffff on rk_grf0
rk_iodomain0: Cannot get property for regulator vccio2-supply
device_attach: rk_iodomain0 attach returned 6
rk_iodomain0: <RockChip IO Voltage Domain> mem 0xfdc20000-0xfdc2ffff on rk_grf0
rk_iodomain0: Cannot get property for regulator vccio2-supply
device_attach: rk_iodomain0 attach returned 6
generic_timer0: <ARMv8 Generic Timer> irq 4,5,6,7 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
rk_iodomain0: <RockChip IO Voltage Domain> mem 0xfdc20000-0xfdc2ffff on rk_grf0
rk_iodomain0: Cannot get property for regulator vccio2-supply
device_attach: rk_iodomain0 attach returned 6
rk_iodomain0: <RockChip IO Voltage Domain> mem 0xfdc20000-0xfdc2ffff on rk_grf0
rk_iodomain0: Cannot get property for regulator vccio2-supply
device_attach: rk_iodomain0 attach returned 6
rk_iodomain0: <RockChip IO Voltage Domain> mem 0xfdc20000-0xfdc2ffff on rk_grf0
rk_iodomain0: Cannot get property for regulator vccio2-supply
device_attach: rk_iodomain0 attach returned 6
rk_tsadc0: <RockChip temperature sensors> mem 0xfe710000-0xfe7100ff irq 74 on ofwbus0
rk_iodomain0: <RockChip IO Voltage Domain> mem 0xfdc20000-0xfdc2ffff on rk_grf0
rk_iodomain0: Cannot get property for regulator vccio2-supply
device_attach: rk_iodomain0 attach returned 6
rk_iodomain0: <RockChip IO Voltage Domain> mem 0xfdc20000-0xfdc2ffff on rk_grf0
rk_iodomain0: Cannot get property for regulator vccio2-supply
device_attach: rk_iodomain0 attach returned 6
rk_iodomain0: <RockChip IO Voltage Domain> mem 0xfdc20000-0xfdc2ffff on rk_grf0
rk_iodomain0: Cannot get property for regulator vccio2-supply
device_attach: rk_iodomain0 attach returned 6
rk_iodomain0: <RockChip IO Voltage Domain> mem 0xfdc20000-0xfdc2ffff on rk_grf0
rk_iodomain0: Cannot get property for regulator vccio2-supply
device_attach: rk_iodomain0 attach returned 6
rk_iodomain0: <RockChip IO Voltage Domain> mem 0xfdc20000-0xfdc2ffff on rk_grf0
rk_iodomain0: Cannot get property for regulator vccio2-supply
device_attach: rk_iodomain0 attach returned 6
rk_iodomain0: <RockChip IO Voltage Domain> mem 0xfdc20000-0xfdc2ffff on rk_grf0
rk_iodomain0: Cannot get property for regulator vccio2-supply
device_attach: rk_iodomain0 attach returned 6
rk_iodomain0: <RockChip IO Voltage Domain> mem 0xfdc20000-0xfdc2ffff on rk_grf0
rk_iodomain0: Cannot get property for regulator vccio2-supply
device_attach: rk_iodomain0 attach returned 6
mmio_sram0: <MMIO SRAM> mem 0x10f000-0x10f0ff on ofwbus0
shmem0: <ARM SCMI Shared Memory driver> mem 0-0xff on mmio_sram0
rk_iodomain0: <RockChip IO Voltage Domain> mem 0xfdc20000-0xfdc2ffff on rk_grf0
rk_iodomain0: Cannot get property for regulator vccio2-supply
device_attach: rk_iodomain0 attach returned 6
rk_usb2phy0: <Rockchip USB2PHY> mem 0xfe8a0000-0xfe8affff irq 76 on ofwbus0
rk_usb2phy1: <Rockchip USB2PHY> mem 0xfe8b0000-0xfe8bffff irq 77 on ofwbus0
scmi_smc0: <ARM SCMI SMC Transport driver> on ofw_firmware0
scmi_smc0: smc id 82000010
scmi_smc0: Transport - max_msg:32 max_payld_sz:132 reply_timo_ms:30
scmi_clk0: <SCMI Clock Management Unit> on scmi_smc0
scmi_clk0: Found 4 clocks.
scmi_clk0: Clock 'clk_scmi_cpu' registered.
scmi_clk0: Clock 'clk_scmi_gpu' registered.
scmi_clk0: Clock 'clk_scmi_npu' registered.
scmi_clk0: Clock 'clk_scmi_ddr' registered.
rk_iodomain0: <RockChip IO Voltage Domain> mem 0xfdc20000-0xfdc2ffff on rk_grf0
rk_iodomain0: Cannot get property for regulator vccio2-supply
device_attach: rk_iodomain0 attach returned 6
smbios0: <System Management BIOS>
smbios0: Version: 3.7
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpufreq_dt0: <Generic cpufreq driver> on cpu0
cpufreq_dt0: Found cpu-supply
cpufreq0: <CPU frequency control> on cpu0
pcm0: <simple-audio-card> on ofwbus0
pmu0: <Performance Monitoring Unit> irq 0,1,2,3 on ofwbus0
snps_dwc3_fdt0: <Synopsys Designware DWC3> mem 0xfcc00000-0xfcffffff irq 10 on ofwbus0
rk3568_combphy2: configuring for USB3 ref_clk=25000000
snps_dwc3_fdt0: 64 bytes context size, 32-bit DMA
usbus0: trying to attach
usbus0 on snps_dwc3_fdt0
snps_dwc3_fdt1: <Synopsys Designware DWC3> mem 0xfd000000-0xfd3fffff irq 11 on ofwbus0
rk3568_combphy0: configuring for USB3 ref_clk=25000000
snps_dwc3_fdt1: 64 bytes context size, 32-bit DMA
usbus1: trying to attach
usbus1 on snps_dwc3_fdt1
ehci0: <Generic EHCI Controller> mem 0xfd800000-0xfd83ffff irq 13 on ofwbus0
usbus2: EHCI version 1.0
usbus2 on ehci0
ohci0: <Generic OHCI Controller> mem 0xfd840000-0xfd87ffff irq 14 on ofwbus0
usbus3 on ohci0
ehci1: <Generic EHCI Controller> mem 0xfd880000-0xfd8bffff irq 15 on ofwbus0
usbus4: EHCI version 1.0
usbus4 on ehci1
ohci1: <Generic OHCI Controller> mem 0xfd8c0000-0xfd8fffff irq 16 on ofwbus0
usbus5 on ohci1
rk_iodomain0: <RockChip IO Voltage Domain> mem 0xfdc20000-0xfdc2ffff on rk_grf0
rk_iodomain0: Cannot get property for regulator vccio2-supply
device_attach: rk_iodomain0 attach returned 6
iic0: <I2C generic I/O> on iicbus0
pcib0: <RockChip RK3568 PCI-express controller> mem 0x3c0000000-0x3c03fffff,0xfe260000-0xfe26ffff,0xf4000000-0xf40fffff irq 36,37,38,39,40 on ofwbus0
pcib0: Cannot get regulator
device_attach: pcib0 attach returned 6
rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe2b0000-0xfe2b3fff irq 41 on ofwbus0
rockchip_dwmmc0: Hardware version ID is 270a
uma_zalloc_debug: zone "malloc-16" with the following non-sleepable locks held:
exclusive sleep mutex rockchip_dwmmc0 (dwmmc) r = 0 (0xffffa001f2280928) locked @ /usr/src/sys/dev/mmc/host/dwmmc.c:480
stack backtrace:
#0 0xffff00000052dc94 at witness_debugger+0x60
#1 0xffff00000052eec8 at witness_warn+0x408
#2 0xffff000000807c94 at uma_zalloc_debug+0x34
#3 0xffff00000080784c at uma_zalloc_arg+0x30
#4 0xffff000000486a8c at malloc+0x8c
#5 0xffff0000004875c0 at reallocf+0x1c
#6 0xffff0000004f22f4 at devclass_add_device+0x1f0
#7 0xffff0000004f0400 at make_device+0x110
#8 0xffff0000004f0200 at device_add_child_ordered+0x30
#9 0xffff0000001fdde0 at dwmmc_card_task+0xec
#10 0xffff0000001fd2f4 at dwmmc_attach+0x664
#11 0xffff0000004f2c28 at device_attach+0x4c0
#12 0xffff0000004f5054 at bus_generic_new_pass+0x130
#13 0xffff0000004f4fe4 at bus_generic_new_pass+0xc0
#14 0xffff0000004f4fe4 at bus_generic_new_pass+0xc0
#15 0xffff0000004f7f44 at root_bus_configure+0x44
#16 0xffff000000435d48 at mi_startup+0x1f4
#17 0xffff000000000898 at virtdone+0x6c
mmc0: <MMC/SD bus> on rockchip_dwmmc0
sdhci_rockchip0: <Rockchip RK3568 fdt SDHCI controller> mem 0xfe310000-0xfe31ffff irq 44 on ofwbus0
sdhci_rockchip0: 1 slot(s) allocated
mmc1: <MMC/SD bus> on sdhci_rockchip0
iicbus1: <unknown card> at addr 0xa2
iic1: <I2C generic I/O> on iicbus1
uart0: <16750 or compatible> mem 0xfe660000-0xfe6600ff irq 66 on ofwbus0
uart0: console (1500000,n,8,1)
gpioc0: <GPIO controller> on gpio0
gpioc1: <GPIO controller> on gpio1
gpioc2: <GPIO controller> on gpio2
gpioc3: <GPIO controller> on gpio3
gpioc4: <GPIO controller> on gpio4
pcib0: <RockChip RK3568 PCI-express controller> mem 0x3c0400000-0x3c07fffff,0xfe270000-0xfe27ffff,0xf2000000-0xf20fffff irq 79,80,81,82,83 on ofwbus0
pcib0: Cannot get regulator
device_attach: pcib0 attach returned 6
pcib0: <RockChip RK3568 PCI-express controller> mem 0x3c0800000-0x3c0bfffff,0xfe280000-0xfe28ffff,0xf0000000-0xf00fffff irq 84,85,86,87,88 on ofwbus0
pcib0: Found 3 ranges, nmem=2
pci0: <OFW PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 0.0 on pci0
pcib1: failed to allocate initial I/O port window: 0-0xfff
pcib1: failed to allocate initial memory window: 0-0xfffff
pcib1: failed to allocate initial prefetch window: 0-0xfffff
pci1: <PCI bus> on pcib1
eqos0: <DesignWare EQOS Gigabit ethernet> mem 0xfe2a0000-0xfe2affff irq 89,90 on ofwbus0
eqos0: no phy-supply property
miibus0: <MII bus> on eqos0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
eqos0: Ethernet address: 22:3c:1b:bc:fb:f9
gpioled0: <GPIO LEDs> on ofwbus0
armv8crypto0: <AES-CBC,AES-XTS,AES-GCM>
Timecounters tick every 1.000 msec
rk817_pmu0: registered as a time-of-day clock, resolution 1.000000s
pcm0: no driver attached to cpu node
rockchip_dwmmc0: failed to set frequency to 400000 Hz: 16
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
usbus5: 12Mbps Full Speed USB v1.0
ugen2.1: <Generic EHCI root HUB> at usbus2
uhub0 on usbus2
uhub0: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen1.1: <Synopsys XHCI root HUB> at usbus1
uhub1 on usbus1
uhub1: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen4.1: <Generic EHCI root HUB> at usbus4
uhub2 on usbus4
uhub2: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen3.1: <Generic OHCI root HUB> at usbus3
uhub3 on usbus3
uhub3: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen5.1: <Generic OHCI root HUB> at usbus5
uhub4 on usbus5
uhub4: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen0.1: <Synopsys XHCI root HUB> at usbus0
uhub5 on usbus0
uhub5: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
rockchip_dwmmc0: failed to set frequency to 50000000 Hz: 16
mmcsd0: 4GB <SDHC SU04G 8.0 SN 1FFDE2F3 MFG 05/2013 by 3 SD> at mmc0 50.0MHz/4bit/1016-block
lock order reversal: (sleepable after non-sleepable)
1st 0xffffa001f25ef030 SD slot mtx (sdhci, sleep mutex) @ /usr/src/sys/dev/sdhci/sdhci.c:1366
2nd 0xffff000000e377d8 Clock topology lock (Clock topology lock, sx) @ /usr/src/sys/dev/clk/clk.c:1208
lock order sdhci -> Clock topology lock attempted at:
#0 0xffff00000052d834 at witness_checkorder+0xad0
#1 0xffff0000004c1044 at _sx_xlock+0x70
#2 0xffff00000014a5e8 at clk_set_freq+0x50
#3 0xffff00000090b724 at sdhci_fdt_rockchip_set_clock+0x11c
#4 0xffff0000002752f4 at sdhci_set_clock+0x78
#5 0xffff000000275a2c at sdhci_generic_update_ios+0xac
#6 0xffff000000200ac0 at mmc_go_discovery+0x9e0
#7 0xffff00000020009c at mmc_delayed_attach+0x38
#8 0xffff0000004ed7d4 at run_interrupt_driven_config_hooks+0x94
#9 0xffff0000004edb50 at boot_run_interrupt_driven_config_hooks+0x30
#10 0xffff000000435d48 at mi_startup+0x1f4
#11 0xffff000000000898 at virtdone+0x6c
CPU 0: ARM Cortex-A55 r2p0 affinity: 0 0
Cache Type = <64 byte CWG,64 byte ERG,64 byte D-cacheline,VIPT I-cache,64 byte I-cacheline>
Instruction Set Attributes 0 = <DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL>
Instruction Set Attributes 1 = <RCPC-8.3,DCPoP>
Instruction Set Attributes 2 = <>
Processor Features 0 = <RAS,GIC,AdvSIMD+HP,FP+HP,EL3 32,EL2 32,EL1 32,EL0 32>
Processor Features 1 = <PSTATE.SSBS>
Processor Features 2 = <>
Memory Model Features 0 = <TGran4,TGran64,TGran16,SNSMem,BigEnd,16bit ASID,1TB PA>
Memory Model Features 1 = <XNX,PAN+ATS1E1,LO,HPD+TTPBHA,VH,16bit VMID,HAF+DS>
Memory Model Features 2 = <32bit CCIDX,48bit VA,IESB,UAO,CnP>
Memory Model Features 3 = <>
Memory Model Features 4 = <>
Debug Features 0 = <DoubleLock,2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3p1,Debugv8p2>
Debug Features 1 = <>
Auxiliary Features 0 = <>
Auxiliary Features 1 = <>
AArch32 Instruction Set Attributes 5 = <RDM,CRC32,SHA2,SHA1,AES+VMULL,SEVL>
AArch32 Media and VFP Features 0 = <FPRound,FPSqrt,FPDivide,DP VFPv3+v4,SP VFPv3+v4,AdvSIMD>
AArch32 Media and VFP Features 1 = <SIMDFMAC,FPHP Arith,SIMDHP Arith,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ>
CPU 1: ARM Cortex-A55 r2p0 affinity: 1 0
CPU 2: ARM Cortex-A55 r2p0 affinity: 2 0
CPU 3: ARM Cortex-A55 r2p0 affinity: 3 0
gic0: using for IPIs
Release APs...done
TCP_ratelimit: Is now initialized
WARNING: WITNESS option enabled, expect reduced performance.
Unresolved linked clock found: clk_32k_pvtm
Unresolved linked clock found: usb480m_phy
Unresolved linked clock found: mpll
Unresolved linked clock found: i2s0_mclkin
Unresolved linked clock found: i2s1_mclkin
Unresolved linked clock found: i2s2_mclkin
Unresolved linked clock found: i2s3_mclkin
Unresolved linked clock found: gpu_pvtpll_out
Trying to mount root from ufs:/dev/da0p2 [rw]...
Unresolved linked clock found: npu_pvtpll_out
Unresolved linked clock found: gmac0_clkin
Unresolved linked clock found: gmac1_clkin
Unresolved linked clock found: clk_gmac0_xpcs_mii
Unresolved linked clock found: clk_gmac1_xpcs_mii
Unresolved linked clock found: dummy
uhub3: 1 port with 1 removable, self powered
uhub4: 1 port with 1 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub2: 1 port with 1 removable, self powered
uhub0: 1 port with 1 removable, self powered
mountroot: waiting for device /dev/da0p2...
usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device JMicron External (0x152d:0xa583)
usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device JMicron External (0x152d:0xa583)
Mounting from ufs:/dev/da0p2 failed with error 19.

Loader variables:
vfs.root.mountfrom=ufs:/dev/da0p2
vfs.root.mountfrom.options=rw

Manual root filesystem specification:
<fstype>:<device> [options]
Mount <device> using filesystem <fstype>
and with the specified (optional) option list.

eg. ufs:/dev/da0s1a
zfs:zroot/ROOT/default
cd9660:/dev/cd0 ro
(which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)

? List valid disk boot devices
. Yield 1 second (for background tasks)
<empty line> Abort manual input

mountroot> usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device JMicron External (0x152d:0xa583)
usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device JMicron External (0x152d:0xa583)
usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device JMicron External (0x152d:0xa583)
usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device JMicron External (0x152d:0xa583)
ugen1.2: <JMicron External> at usbus1
umass0 on uhub1
umass0: <JMicron External, class 0/0, rev 3.20/2.14, addr 1> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0xc105<NO_TEST_UNIT_READY,NO_START_STOP,NO_GETMAXLUN,NO_SYNCHRONIZE_CACHE,NO_PREVENT_ALLOW>
umass0:0:0: Attached to scbus0
da0: <JMicron Tech 0214> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number DD56419883914
da0: 400.000MB/s transfers
da0: 244198MB (500118192 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
da0: <JMicron Tech 0214> s/n DD56419883914 detached
g_dev_taste: g_dev_taste(da0) failed to g_attach, error=6
Trying to mount root from ufs:/dev/da0p2 []...
mountroot: waiting for device /dev/da0p2...
Mounting from ufs:/dev/da0p2 failed with error 19.

mountroot> Trying to mount root from ufs:/dev/da0p2 []...
mountroot: waiting for device /dev/da0p2...
Mounting from ufs:/dev/da0p2 failed with error 19.

mountroot> ugen1.2: <JMicron External> at usbus1 (disconnected)
umass0: at uhub1, port 2, addr 1 (disconnected)
umass0: detached
usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device JMicron External (0x152d:0xa583)
usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device JMicron External (0x152d:0xa583)
usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device JMicron External (0x152d:0xa583)
ugen1.2: <JMicron External> at usbus1
umass0 on uhub1
umass0: <JMicron External, class 0/0, rev 3.20/2.14, addr 1> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0x8101<NO_TEST_UNIT_READY,NO_GETMAXLUN,NO_PREVENT_ALLOW>
umass0:0:0: Attached to scbus0
da0: <JMicron Tech 0214> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number DD56419883914
da0: 400.000MB/s transfers
da0: 244198MB (500118192 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
Trying to mount root from ufs:/dev/da0p2 []...
Warning: bad time from time-of-day clock, system time will not be set accurately
hym8563_rtc0: <HYM8694 RTC> at addr 0xa2 irq 97 on iicbus1
hym8563_rtc0: registered as a time-of-day clock, resolution 1.000000s
lo0: link state changed to UP
eqos0: link state changed to DOWN
eqos0: link state changed to UP
Security policy loaded: MAC/ntpd (mac_ntpd)
eqos0: link state changed to DOWN
ugen0.2: <ASIX Elec. Corp. AX88179> at usbus0
axge0 on uhub5
axge0: <ASIX Elec. Corp. AX88179, rev 3.00/1.00, addr 1> on usbus0
miibus1: <MII bus> on axge0
rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 3 on miibus1
rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
ue0: <USB Ethernet> on axge0
ue0: Ethernet address: d8:eb:97:b0:77:9d
ue0: link state changed to DOWN
ue0: link state changed to UP
Click to expand...
 
The above dmesg uses u-boot, same version.

For the record after the patch, eqos0 is not usable anymore. Can't get IP from dhcp. The boot above has a nvme over USB and another nvme on the slot. As was too long, the above dmesg was filtered like this: cat ../dmesg | grep -v umass-sim0.

Removing the nvme from slot, the boot was fine (with nvme the boot fails, usb shows late and I need to point root file system), but eqos0 still unusable. Is the behavior the desired one?

none
 
There are two other problems. The pcie driver requires the "vpcie3v3-supply" property in DT, even though it is documented as optional. The same problem exists in the rk_iodomain driver with vccio2-supply.

The fixes are easy, but it must be tested on r5s (since they are specific to r5s). You seem to be able to test it, so give me a while (day or so...) to get them ready.
 
mmel_fbsd said:
There are two other problems. The pcie driver requires the "vpcie3v3-supply" property in DT, even though it is documented as optional. The same problem exists in the rk_iodomain driver with vccio2-supply.

The fixes are easy, but it must be tested on r5s (since they are specific to r5s). You seem to be able to test it, so give me a while (day or so...) to get them ready.
Click to expand...
Hi, thanks for the support. I can test this this week. I will wait for you to finish.

If is of any help, yesterday I tested OpenBSD 7.5 and 7.6, and both work fine using FreeBSD u-boot code. The R5S is right now in my home at iperf test since last night. Both realtek NIC's are working.

none
 
Perfect. Can you try these 2 patches? Apply on top of the previous patch (the one you already have applied).

In any case, please, post the verbose boot log here.

Thanks,
Michal
 

Attachments

---<<BOOT>>---
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
WARNING: Cannot find freebsd,dts-version property, cannot check DTB compliance
Copyright (c) 1992-2025 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 15.0-CURRENT #1 main-n275440-91bae242bc54-dirty: Tue Feb 18 22:44:10 -03 2025
root@R5S-dev:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
real memory = 4292780032 (4093 MB)
avail memory = 4155355136 (3962 MB)
Starting CPU 1 (100)
Starting CPU 2 (200)
Starting CPU 3 (300)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
ofw_firmware0: <OFW Firmware Group> on ofwbus0
rk_grf0: <RockChip General Register Files> mem 0xfdc20000-0xfdc2ffff on ofwbus0
rk_grf1: <RockChip General Register Files> mem 0xfdc50000-0xfdc50fff on ofwbus0
rk_grf2: <RockChip General Register Files> mem 0xfdc60000-0xfdc6ffff on ofwbus0
rk_grf3: <RockChip General Register Files> mem 0xfdc80000-0xfdc80fff on ofwbus0
rk_grf4: <RockChip General Register Files> mem 0xfdc90000-0xfdc90fff on ofwbus0
rk_grf5: <RockChip General Register Files> mem 0xfdca0000-0xfdca7fff on ofwbus0
rk_grf6: <RockChip General Register Files> mem 0xfdca8000-0xfdcaffff on ofwbus0
rk3568_pmucru0: <Rockchip RK3568 PMU Clock & Reset Unit> mem 0xfdd00000-0xfdd00fff on ofwbus0
rk3568_cru0: <Rockchip RK3568 Clock & Reset Unit> mem 0xfdd20000-0xfdd20fff on ofwbus0
rk3568_cru0: cannot get parent at idx 0
rk_grf7: <RockChip General Register Files> mem 0xfdc70000-0xfdc70fff on ofwbus0
rk_grf8: <RockChip General Register Files> mem 0xfdcb8000-0xfdcc7fff on ofwbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
regfix2: <Fixed Regulator> on ofwbus0
regfix3: <Fixed Regulator> on ofwbus0
regfix4: <Fixed Regulator> on ofwbus0
regfix5: <Fixed Regulator> on ofwbus0
regfix6: <Fixed Regulator> on ofwbus0
regfix7: <Fixed Regulator> on ofwbus0
regfix8: <Fixed Regulator> on ofwbus0
rk_otp0: <RockChip OTP> mem 0xfe38c000-0xfe38ffff on ofwbus0
simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xfdd90000-0xfdd90fff on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
smccc0: <ARM SMCCC v1.2> on psci0
rk3568_combphy0: <RockChip combo PHY> mem 0xfe830000-0xfe8300ff on ofwbus0
rk3568_combphy1: <RockChip combo PHY> mem 0xfe840000-0xfe8400ff on ofwbus0
rk3568_pciephy0: <RockChip PCIe PHY> mem 0xfe8c0000-0xfe8dffff on ofwbus0
rk3568_combphy2: <RockChip combo PHY> mem 0xfe820000-0xfe8200ff on ofwbus0
gic0: <ARM Generic Interrupt Controller v3.0> mem 0xfd400000-0xfd40ffff,0xfd460000-0xfd4dffff irq 12 on ofwbus0
rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0
gpio0: <RockChip GPIO Bank controller> mem 0xfdd60000-0xfdd600ff irq 91 on rk_pinctrl0
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <RockChip GPIO Bank controller> mem 0xfe740000-0xfe7400ff irq 92 on rk_pinctrl0
gpiobus1: <OFW GPIO bus> on gpio1
gpio2: <RockChip GPIO Bank controller> mem 0xfe750000-0xfe7500ff irq 93 on rk_pinctrl0
gpiobus2: <OFW GPIO bus> on gpio2
gpio3: <RockChip GPIO Bank controller> mem 0xfe760000-0xfe7600ff irq 94 on rk_pinctrl0
gpiobus3: <OFW GPIO bus> on gpio3
gpio4: <RockChip GPIO Bank controller> mem 0xfe770000-0xfe7700ff irq 95 on rk_pinctrl0
gpiobus4: <OFW GPIO bus> on gpio4
rk_i2c0: <RockChip I2C> mem 0xfdd40000-0xfdd40fff irq 17 on ofwbus0
iicbus0: <OFW I2C bus> on rk_i2c0
fan53555_pmic0: <TCS4525 PMIC> at addr 0x38 on iicbus0
rk817_pmu0: <RockChip RK809 PMIC> at addr 0x40 irq 96 on iicbus0
rk_i2c1: <RockChip I2C> mem 0xfe5e0000-0xfe5e0fff irq 59 on ofwbus0
iicbus1: <OFW I2C bus> on rk_i2c1
rk_iodomain0: <RockChip IO Voltage Domain> mem 0xfdc20000-0xfdc2ffff on rk_grf0
generic_timer0: <ARMv8 Generic Timer> irq 4,5,6,7 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
rk_tsadc0: <RockChip temperature sensors> mem 0xfe710000-0xfe7100ff irq 74 on ofwbus0
mmio_sram0: <MMIO SRAM> mem 0x10f000-0x10f0ff on ofwbus0
shmem0: <ARM SCMI Shared Memory driver> mem 0-0xff on mmio_sram0
rk_usb2phy0: <Rockchip USB2PHY> mem 0xfe8a0000-0xfe8affff irq 76 on ofwbus0
rk_usb2phy1: <Rockchip USB2PHY> mem 0xfe8b0000-0xfe8bffff irq 77 on ofwbus0
scmi_smc0: <ARM SCMI SMC Transport driver> on ofw_firmware0
scmi_smc0: smc id 82000010
scmi_smc0: Transport - max_msg:32 max_payld_sz:132 reply_timo_ms:30
scmi_clk0: <SCMI Clock Management Unit> on scmi_smc0
scmi_clk0: Found 4 clocks.
scmi_clk0: Clock 'clk_scmi_cpu' registered.
scmi_clk0: Clock 'clk_scmi_gpu' registered.
scmi_clk0: Clock 'clk_scmi_npu' registered.
scmi_clk0: Clock 'clk_scmi_ddr' registered.
smbios0: <System Management BIOS>
smbios0: Version: 3.7
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpufreq_dt0: <Generic cpufreq driver> on cpu0
cpufreq_dt0: Found cpu-supply
cpufreq0: <CPU frequency control> on cpu0
pcm0: <simple-audio-card> on ofwbus0
pmu0: <Performance Monitoring Unit> irq 0,1,2,3 on ofwbus0
snps_dwc3_fdt0: <Synopsys Designware DWC3> mem 0xfcc00000-0xfcffffff irq 10 on ofwbus0
rk3568_combphy2: configuring for USB3 ref_clk=25000000
snps_dwc3_fdt0: 64 bytes context size, 32-bit DMA
usbus0: trying to attach
usbus0 on snps_dwc3_fdt0
snps_dwc3_fdt1: <Synopsys Designware DWC3> mem 0xfd000000-0xfd3fffff irq 11 on ofwbus0
rk3568_combphy0: configuring for USB3 ref_clk=25000000
snps_dwc3_fdt1: 64 bytes context size, 32-bit DMA
usbus1: trying to attach
usbus1 on snps_dwc3_fdt1
ehci0: <Generic EHCI Controller> mem 0xfd800000-0xfd83ffff irq 13 on ofwbus0
usbus2: EHCI version 1.0
usbus2 on ehci0
ohci0: <Generic OHCI Controller> mem 0xfd840000-0xfd87ffff irq 14 on ofwbus0
usbus3 on ohci0
ehci1: <Generic EHCI Controller> mem 0xfd880000-0xfd8bffff irq 15 on ofwbus0
usbus4: EHCI version 1.0
usbus4 on ehci1
ohci1: <Generic OHCI Controller> mem 0xfd8c0000-0xfd8fffff irq 16 on ofwbus0
usbus5 on ohci1
iic0: <I2C generic I/O> on iicbus0
pcib0: <RockChip RK3568 PCI-express controller> mem 0x3c0000000-0x3c03fffff,0xfe260000-0xfe26ffff,0xf4000000-0xf40fffff irq 36,37,38,39,40 on ofwbus0
rk3568_combphy1: configuring for PCIe ref_clk=25000000
pcib0: Found 3 ranges, nmem=2
pci0: <OFW PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 0.0 on pci0
pcib1: failed to allocate initial I/O port window: 0-0xfff
pcib1: failed to allocate initial memory window: 0-0xfffff
pcib1: failed to allocate initial prefetch window: 0-0xfffff
pci1: <PCI bus> on pcib1
pci1: <network, ethernet> at device 0.0 (no driver attached)
rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe2b0000-0xfe2b3fff irq 41 on ofwbus0
rockchip_dwmmc0: Hardware version ID is 270a
uma_zalloc_debug: zone "malloc-16" with the following non-sleepable locks held:
exclusive sleep mutex rockchip_dwmmc0 (dwmmc) r = 0 (0xffffa001f2280128) locked @ /usr/src/sys/dev/mmc/host/dwmmc.c:480
stack backtrace:
#0 0xffff00000052dc94 at witness_debugger+0x60
#1 0xffff00000052eec8 at witness_warn+0x408
#2 0xffff000000807c94 at uma_zalloc_debug+0x34
#3 0xffff00000080784c at uma_zalloc_arg+0x30
#4 0xffff000000486a8c at malloc+0x8c
#5 0xffff0000004875c0 at reallocf+0x1c
#6 0xffff0000004f22f4 at devclass_add_device+0x1f0
#7 0xffff0000004f0400 at make_device+0x110
#8 0xffff0000004f0200 at device_add_child_ordered+0x30
#9 0xffff0000001fdde0 at dwmmc_card_task+0xec
#10 0xffff0000001fd2f4 at dwmmc_attach+0x664
#11 0xffff0000004f2c28 at device_attach+0x4c0
#12 0xffff0000004f5054 at bus_generic_new_pass+0x130
#13 0xffff0000004f4fe4 at bus_generic_new_pass+0xc0
#14 0xffff0000004f4fe4 at bus_generic_new_pass+0xc0
#15 0xffff0000004f7f44 at root_bus_configure+0x44
#16 0xffff000000435d48 at mi_startup+0x1f4
#17 0xffff000000000898 at virtdone+0x6c
mmc0: <MMC/SD bus> on rockchip_dwmmc0
sdhci_rockchip0: <Rockchip RK3568 fdt SDHCI controller> mem 0xfe310000-0xfe31ffff irq 44 on ofwbus0
sdhci_rockchip0: 1 slot(s) allocated
mmc1: <MMC/SD bus> on sdhci_rockchip0
iicbus1: <unknown card> at addr 0xa2
iic1: <I2C generic I/O> on iicbus1
uart0: <16750 or compatible> mem 0xfe660000-0xfe6600ff irq 66 on ofwbus0
uart0: console (1500000,n,8,1)
gpioc0: <GPIO controller> on gpio0
gpioc1: <GPIO controller> on gpio1
gpioc2: <GPIO controller> on gpio2
gpioc3: <GPIO controller> on gpio3
gpioc4: <GPIO controller> on gpio4
pcib2: <RockChip RK3568 PCI-express controller> mem 0x3c0400000-0x3c07fffff,0xfe270000-0xfe27ffff,0xf2000000-0xf20fffff irq 79,80,81,82,83 on ofwbus0
pcib2: Found 3 ranges, nmem=2
pci2: <OFW PCI bus> on pcib2
pcib3: <PCI-PCI bridge> at device 0.0 on pci2
pcib3: failed to allocate initial I/O port window: 0-0xfff
pcib3: failed to allocate initial memory window: 0-0xfffff
pcib3: failed to allocate initial prefetch window: 0-0xfffff
pci3: <PCI bus> on pcib3
pci3: <network, ethernet> at device 0.0 (no driver attached)
pcib4: <RockChip RK3568 PCI-express controller> mem 0x3c0800000-0x3c0bfffff,0xfe280000-0xfe28ffff,0xf0000000-0xf00fffff irq 84,85,86,87,88 on ofwbus0
pcib4: Found 3 ranges, nmem=2
pci4: <OFW PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 0.0 on pci4
pcib5: failed to allocate initial I/O port window: 0-0xfff
pcib5: failed to allocate initial memory window: 0-0xfffff
pcib5: failed to allocate initial prefetch window: 0-0xfffff
pci5: <PCI bus> on pcib5
eqos0: <DesignWare EQOS Gigabit ethernet> mem 0xfe2a0000-0xfe2affff irq 89,90 on ofwbus0
eqos0: no phy-supply property
miibus0: <MII bus> on eqos0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
eqos0: Ethernet address: 22:3c:1b:bc:fb:f9
gpioled0: <GPIO LEDs> on ofwbus0
armv8crypto0: <AES-CBC,AES-XTS,AES-GCM>
Timecounters tick every 1.000 msec
rk817_pmu0: registered as a time-of-day clock, resolution 1.000000s
pcm0: no driver attached to cpu node
rockchip_dwmmc0: failed to set frequency to 400000 Hz: 16
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
usbus5: 12Mbps Full Speed USB v1.0
ugen2.1: <Generic EHCI root HUB> at usbus2
uhub0 on usbus2
uhub0: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen1.1: <Synopsys XHCI root HUB> at usbus1
uhub1 on usbus1
uhub1: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen5.1: <Generic OHCI root HUB> at usbus5
uhub2 on usbus5
uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen4.1: <Generic EHCI root HUB> at usbus4
uhub3 on usbus4
uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen3.1: <Generic OHCI root HUB> at usbus3
uhub4 on usbus3
uhub4: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen0.1: <Synopsys XHCI root HUB> at usbus0
uhub5 on usbus0
uhub5: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
rockchip_dwmmc0: failed to set frequency to 50000000 Hz: 16
mmcsd0: 8GB <SDHC SD8GB 3.0 SN 5CA87FBC MFG 08/2015 by 65 42> at mmc0 50.0MHz/4bit/1016-block
lock order reversal: (sleepable after non-sleepable)
1st 0xffffa001f25ea030 SD slot mtx (sdhci, sleep mutex) @ /usr/src/sys/dev/sdhci/sdhci.c:1366
2nd 0xffff000000e377d8 Clock topology lock (Clock topology lock, sx) @ /usr/src/sys/dev/clk/clk.c:1208
lock order sdhci -> Clock topology lock attempted at:
#0 0xffff00000052d834 at witness_checkorder+0xad0
#1 0xffff0000004c1044 at _sx_xlock+0x70
#2 0xffff00000014a5e8 at clk_set_freq+0x50
#3 0xffff00000090b724 at sdhci_fdt_rockchip_set_clock+0x11c
#4 0xffff0000002752f4 at sdhci_set_clock+0x78
#5 0xffff000000275a2c at sdhci_generic_update_ios+0xac
#6 0xffff000000200ac0 at mmc_go_discovery+0x9e0
#7 0xffff00000020009c at mmc_delayed_attach+0x38
#8 0xffff0000004ed7d4 at run_interrupt_driven_config_hooks+0x94
#9 0xffff0000004edb50 at boot_run_interrupt_driven_config_hooks+0x30
#10 0xffff000000435d48 at mi_startup+0x1f4
#11 0xffff000000000898 at virtdone+0x6c
CPU 0: ARM Cortex-A55 r2p0 affinity: 0 0
Cache Type = <64 byte CWG,64 byte ERG,64 byte D-cacheline,VIPT I-cache,64 byte I-cacheline>
Instruction Set Attributes 0 = <DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL>
Instruction Set Attributes 1 = <RCPC-8.3,DCPoP>
Instruction Set Attributes 2 = <>
Processor Features 0 = <RAS,GIC,AdvSIMD+HP,FP+HP,EL3 32,EL2 32,EL1 32,EL0 32>
Processor Features 1 = <PSTATE.SSBS>
Processor Features 2 = <>
Memory Model Features 0 = <TGran4,TGran64,TGran16,SNSMem,BigEnd,16bit ASID,1TB PA>
Memory Model Features 1 = <XNX,PAN+ATS1E1,LO,HPD+TTPBHA,VH,16bit VMID,HAF+DS>
Memory Model Features 2 = <32bit CCIDX,48bit VA,IESB,UAO,CnP>
Memory Model Features 3 = <>
Memory Model Features 4 = <>
Debug Features 0 = <DoubleLock,2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3p1,Debugv8p2>
Debug Features 1 = <>
Auxiliary Features 0 = <>
Auxiliary Features 1 = <>
AArch32 Instruction Set Attributes 5 = <RDM,CRC32,SHA2,SHA1,AES+VMULL,SEVL>
AArch32 Media and VFP Features 0 = <FPRound,FPSqrt,FPDivide,DP VFPv3+v4,SP VFPv3+v4,AdvSIMD>
AArch32 Media and VFP Features 1 = <SIMDFMAC,FPHP Arith,SIMDHP Arith,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ>
CPU 1: ARM Cortex-A55 r2p0 affinity: 1 0
CPU 2: ARM Cortex-A55 r2p0 affinity: 2 0
CPU 3: ARM Cortex-A55 r2p0 affinity: 3 0
gic0: using for IPIs
Release APs...done
TCP_ratelimit: Is now initialized
WARNING: WITNESS option enabled, expect reduced performance.
Unresolved linked clock found: clk_32k_pvtm
Unresolved linked clock found: usb480m_phy
Trying to mount root from ufs:/dev/da0p2 [rw]...
Unresolved linked clock found: mpll
Unresolved linked clock found: i2s0_mclkin
Unresolved linked clock found: i2s1_mclkin
Unresolved linked clock found: i2s2_mclkin
Unresolved linked clock found: i2s3_mclkin
Unresolved linked clock found: gpu_pvtpll_out
Unresolved linked clock found: npu_pvtpll_out
Unresolved linked clock found: gmac0_clkin
Unresolved linked clock found: gmac1_clkin
Unresolved linked clock found: clk_gmac0_xpcs_mii
Unresolved linked clock found: clk_gmac1_xpcs_mii
Unresolved linked clock found: dummy
uhub2: 1 port with 1 removable, self powered
uhub4: 1 port with 1 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub0: 1 port with 1 removable, self powered
uhub3: 1 port with 1 removable, self powered
ugen1.2: <ASIX Elec. Corp. AX88179> at usbus1
usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device JMicron External (0x152d:0xa583)
Root mount waiting for: usbus0 CAM
usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device JMicron External (0x152d:0xa583)
Root mount waiting for: usbus0 CAM
Root mount waiting for: usbus0 CAM
ugen0.2: <JMicron External> at usbus0
umass0 on uhub5
umass0: <JMicron External, class 0/0, rev 3.20/2.14, addr 1> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0x8100<NO_GETMAXLUN,NO_PREVENT_ALLOW>
umass0:0:0: Attached to scbus0
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <JMicron Tech 0214> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number DD56419883914
da0: 400.000MB/s transfers
da0: 244198MB (500118192 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
Warning: bad time from time-of-day clock, system time will not be set accurately
hym8563_rtc0: <HYM8694 RTC> at addr 0xa2 irq 97 on iicbus1
hym8563_rtc0: registered as a time-of-day clock, resolution 1.000000s
lo0: link state changed to UP
eqos0: link state changed to DOWN
axge0 on uhub1
axge0: <ASIX Elec. Corp. AX88179, rev 3.00/1.00, addr 1> on usbus1
miibus1: <MII bus> on axge0
rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 3 on miibus1
rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
ue0: <USB Ethernet> on axge0
ue0: Ethernet address: d8:eb:97:b0:77:9d
ue0: link state changed to DOWN
ue0: link state changed to UP
ue0: link state changed to DOWN
ue0: 3 link states coalesced
ue0: link state changed to UP
Security policy loaded: MAC/ntpd (mac_ntpd)
Click to expand...

Hi,

still no realtek's. But the boot process was more clean.

root@R5S-dev:~ # pciconf -Bl
pcib1@pci0:0:0:0: class=0x060400 rev=0x01 hdr=0x01 vendor=0x1d87 device=0x3566 subvendor=0x0000 subdevice=0x0000
bus range = 1-255
window[1c] = type I/O Port, range 16, addr 0xf000-0xfff, disabled
window[20] = type Memory, range 32, addr 0xfff00000-0xfffff, disabled
window[24] = type Prefetchable Memory, range 64, addr 0xfffffffffff00000-0xfffff, disabled
none0@pci0:1:0:0: class=0x020000 rev=0x05 hdr=0x00 vendor=0x10ec device=0x8125 subvendor=0x10ec subdevice=0x8125
pcib3@pci2:0:0:0: class=0x060400 rev=0x01 hdr=0x01 vendor=0x1d87 device=0x3566 subvendor=0x0000 subdevice=0x0000
bus range = 1-255
window[1c] = type I/O Port, range 16, addr 0xf000-0xfff, disabled
window[20] = type Memory, range 32, addr 0xfff00000-0xfffff, disabled
window[24] = type Prefetchable Memory, range 64, addr 0xfffffffffff00000-0xfffff, disabled
none1@pci2:1:0:0: class=0x020000 rev=0x05 hdr=0x00 vendor=0x10ec device=0x8125 subvendor=0x10ec subdevice=0x8125
pcib5@pci4:0:0:0: class=0x060400 rev=0x01 hdr=0x01 vendor=0x1d87 device=0x3566 subvendor=0x0000 subdevice=0x0000
bus range = 1-255
window[1c] = type I/O Port, range 16, addr 0xf000-0xfff, disabled
window[20] = type Memory, range 32, addr 0xfff00000-0xfffff, disabled
window[24] = type Prefetchable Memory, range 64, addr 0xfffffffffff00000-0xfffff, disabled
Click to expand...

I don't have the kmod for realtek installed. the regular one, nor the 198 version. Should I?

none
 
Nice, both network cards are found:
pci1: <network, ethernet> on device 0.0 (no driver connected)
pci3: <network, ethernet> on device 0.0 (no driver connected)

So yes, PCIe is working now, but the drivers are missing.
Can you post a detailed PCIe dump?
pciconf -lBbcevV

The regular driver (if_re) works, but probably doesn't support your card. Unfortunately I have zero experience with the one from ports, but anyway the pcie dump from above will give us exact versions of the chips...

Michal
 
root@R5S-dev:~ # pciconf -lBbcevV
pcib1@pci0:0:0:0: class=0x060400 rev=0x01 hdr=0x01 vendor=0x1d87 device=0x3566 subvendor=0x0000 subdevice=0x0000
vendor = 'Rockchip Electronics Co., Ltd'
device = 'RK3568 Remote Signal Processor'
class = bridge
subclass = PCI-PCI
bus range = 1-255
window[1c] = type I/O Port, range 16, addr 0xf000-0xfff, disabled
window[20] = type Memory, range 32, addr 0xfff00000-0xfffff, disabled
window[24] = type Prefetchable Memory, range 64, addr 0xfffffffffff00000-0xfffff, disabled
cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 05[50] = MSI supports 32 messages, 64 bit
cap 10[70] = PCI-Express 2 root port max data 128(128) RO
max read 512
link x1(x1) speed 5.0(8.0) ASPM disabled(L0s/L1)
cap 11[b0] = MSI-X supports 1 message
Table in map 0x10[0x0], PBA in map 0x10[0x10]
ecap 0001[100] = AER 2 0 fatal 0 non-fatal 0 corrected
ecap 0019[148] = PCIe Sec 1 lane errors 0
ecap 001e[160] = L1 PM Substates 1
ecap 000b[170] = Vendor [1] ID 0002 Rev 4 Length 256
none0@pci0:1:0:0: class=0x020000 rev=0x05 hdr=0x00 vendor=0x10ec device=0x8125 subvendor=0x10ec subdevice=0x8125
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8125 2.5GbE Controller'
class = network
subclass = ethernet
bar [10] = type I/O Port, range 32, base 0, size 256, disabled
bar [18] = type Memory, range 64, base 0, size 65536, disabled
bar [20] = type Memory, range 64, base 0, size 16384, disabled
cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 05[50] = MSI supports 1 message, 64 bit, vector masks
cap 10[70] = PCI-Express 2 endpoint MSI 1 max data 128(256) RO
max read 512
link x1(x1) speed 5.0(5.0) ASPM disabled(L0s/L1) ClockPM disabled
cap 11[b0] = MSI-X supports 32 messages
Table in map 0x20[0x0], PBA in map 0x20[0x800]
cap 03[d0] = VPD
ecap 0001[100] = AER 2 0 fatal 0 non-fatal 0 corrected
ecap 0002[148] = VC 1 max VC0
ecap 0003[168] = Serial 1 0000000000000000
ecap 0017[178] = TPH Requester 1
ecap 0018[204] = LTR 1
ecap 001e[20c] = L1 PM Substates 1
ecap 000b[21c] = Vendor [1] ID 0002 Rev 4 Length 256
pcib3@pci2:0:0:0: class=0x060400 rev=0x01 hdr=0x01 vendor=0x1d87 device=0x3566 subvendor=0x0000 subdevice=0x0000
vendor = 'Rockchip Electronics Co., Ltd'
device = 'RK3568 Remote Signal Processor'
class = bridge
subclass = PCI-PCI
bus range = 1-255
window[1c] = type I/O Port, range 16, addr 0xf000-0xfff, disabled
window[20] = type Memory, range 32, addr 0xfff00000-0xfffff, disabled
window[24] = type Prefetchable Memory, range 64, addr 0xfffffffffff00000-0xfffff, disabled
cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 05[50] = MSI supports 32 messages, 64 bit
cap 10[70] = PCI-Express 2 root port MSI 8 max data 128(256) RO
max read 512
link x1(x1) speed 5.0(8.0) ASPM disabled(L1)
cap 11[b0] = MSI-X supports 128 messages
Table in map 0x20[0x20000], PBA in map 0x20[0x28000]
ecap 0001[100] = AER 2 0 fatal 0 non-fatal 0 corrected
ecap 0019[148] = PCIe Sec 1 lane errors 0
ecap 001e[160] = L1 PM Substates 1
ecap 000b[170] = Vendor [1] ID 0002 Rev 4 Length 256
none1@pci2:1:0:0: class=0x020000 rev=0x05 hdr=0x00 vendor=0x10ec device=0x8125 subvendor=0x10ec subdevice=0x8125
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8125 2.5GbE Controller'
class = network
subclass = ethernet
bar [10] = type I/O Port, range 32, base 0, size 256, disabled
bar [18] = type Memory, range 64, base 0, size 65536, disabled
bar [20] = type Memory, range 64, base 0, size 16384, disabled
cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 05[50] = MSI supports 1 message, 64 bit, vector masks
cap 10[70] = PCI-Express 2 endpoint MSI 1 max data 128(256) RO
max read 512
link x1(x1) speed 5.0(5.0) ASPM disabled(L0s/L1) ClockPM disabled
cap 11[b0] = MSI-X supports 32 messages
Table in map 0x20[0x0], PBA in map 0x20[0x800]
cap 03[d0] = VPD
ecap 0001[100] = AER 2 0 fatal 0 non-fatal 0 corrected
ecap 0002[148] = VC 1 max VC0
ecap 0003[168] = Serial 1 0000000000000000
ecap 0017[178] = TPH Requester 1
ecap 0018[204] = LTR 1
ecap 001e[20c] = L1 PM Substates 1
ecap 000b[21c] = Vendor [1] ID 0002 Rev 4 Length 256
pcib5@pci4:0:0:0: class=0x060400 rev=0x01 hdr=0x01 vendor=0x1d87 device=0x3566 subvendor=0x0000 subdevice=0x0000
vendor = 'Rockchip Electronics Co., Ltd'
device = 'RK3568 Remote Signal Processor'
class = bridge
subclass = PCI-PCI
bar [10] = type Memory, range 64, base 0, size 1073741824, enabled
bus range = 1-255
window[1c] = type I/O Port, range 16, addr 0xf000-0xfff, disabled
window[20] = type Memory, range 32, addr 0xfff00000-0xfffff, disabled
window[24] = type Prefetchable Memory, range 64, addr 0xfffffffffff00000-0xfffff, disabled
cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 05[50] = MSI supports 32 messages, 64 bit, vector masks
cap 10[70] = PCI-Express 2 root port MSI 8 max data 128(256) RO
max read 512
link x1(x2) speed 2.5(8.0) ASPM disabled(L1)
cap 11[b0] = MSI-X supports 128 messages
Table in map 0x20[0x20000], PBA in map 0x20[0x28000]
ecap 0001[100] = AER 2 0 fatal 0 non-fatal 0 corrected
ecap 0019[148] = PCIe Sec 1 lane errors 0
ecap 001e[160] = L1 PM Substates 1
ecap 000b[1a0] = Vendor [1] ID 0002 Rev 4 Length 256
ecap 000b[2a0] = Vendor [1] ID 0006 Rev 0 Length 24
Click to expand...

and

root@R5S-dev:~ # ifconfig
eqos0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80008<VLAN_MTU,LINKSTATE>
ether xx
media: Ethernet autoselect (none)
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
ue0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE>
ether xx
inet 10.1.1.65 netmask 0xffffff00 broadcast 10.1.1.255
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Click to expand...
 
You must log in or register to reply here.
Back
Top