AMD Ryzen 9 7940HS (Radeon 780M) - Graphics now working!

I also faced the problem of supporting the new iGPU for AMD Ryzen 7 9700x.
After installing graphics/drm-61-kmod and graphics/gpu-firmware-kmod-amd, I load amdgpu.ko
The screen turned off, but the SSH system was available.

I tried to install different options gpu-firmware-kmod-amd, but this did not help.
After that, I installed all firmware files for all graphics card - installed graphics/gpu-firmware-kmod.
This also did not help. There were errors in the logs.

Code: 
[drm ERROR :dc_dmub_srv_cmd_queue] Error queuing DMUB command: status=2
[drm ERROR :dc_dmub_srv_wait_idle] Error waiting for DMUB idle: status=3
By this error, I found a solution to the problem here issues/2666
I took the corrected file amdgpu/dcn_3_1_5_dmcub.bin here amdgpu/dcn_3_1_5_dmcub.bin

I compiled gpu-firmware-amd-kmod-dcn-3-1-5 with this "amdgpu/dcn_3_1_5_dmcub.bin". After that, everything worked fine.
Xorg.0.log (part)
Code: 
[    21.145] (II) AMDGPU(0): glamor X acceleration enabled on AMD Radeon Graphics (radeonsi, raphael_mendocino, LLVM 15.0.7, DRM 3.49, 14.2-RELEASE)
[    21.145] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[    21.145] (==) AMDGPU(0): TearFree property default: auto
[    21.145] (==) AMDGPU(0): VariableRefresh: disabled
[    21.145] (==) AMDGPU(0): AsyncFlipSecondaries: disabled
[    21.145] (II) AMDGPU(0): KMS Pageflipping: enabled
[    21.145] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[    21.147] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[    21.147] (II) AMDGPU(0): Output DisplayPort-1 has no monitor section
[    21.160] (II) AMDGPU(0): EDID for output HDMI-A-0
[    21.161] (II) AMDGPU(0): EDID for output DisplayPort-0
[    21.161] (II) AMDGPU(0): Year: 2024  Week: 14
[    21.161] (II) AMDGPU(0): EDID Version: 1.4
[    21.161] (II) AMDGPU(0): Digital Display Input
[    21.161] (II) AMDGPU(0): 10 bits per channel
[    21.161] (II) AMDGPU(0): Digital interface is DisplayPort
[    21.161] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 60  vert.: 34
[    21.161] (II) AMDGPU(0): Gamma: 2.20
[    21.162] (II) AMDGPU(0): DPMS capabilities: Off
[    21.162] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
[    21.162] (II) AMDGPU(0): First detailed timing is preferred mode
[    21.162] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[    21.162] (II) AMDGPU(0): Display is continuous-frequency
[    21.162] (II) AMDGPU(0): redX: 0.666 redY: 0.328   greenX: 0.277 greenY: 0.665
[    21.162] (II) AMDGPU(0): blueX: 0.146 blueY: 0.050   whiteX: 0.313 whiteY: 0.329
[    21.162] (II) AMDGPU(0): Supported established timings:
[    21.162] (II) AMDGPU(0): 720x400@70Hz
[    21.162] (II) AMDGPU(0): 640x480@60Hz
[    21.162] (II) AMDGPU(0): 640x480@67Hz
[    21.162] (II) AMDGPU(0): 640x480@75Hz
[    21.162] (II) AMDGPU(0): 800x600@56Hz
[    21.162] (II) AMDGPU(0): 800x600@60Hz
[    21.162] (II) AMDGPU(0): 800x600@75Hz
[    21.162] (II) AMDGPU(0): 1024x768@60Hz
[    21.162] (II) AMDGPU(0): 1024x768@70Hz
[    21.162] (II) AMDGPU(0): 1024x768@75Hz
[    21.162] (II) AMDGPU(0): 1280x1024@75Hz
[    21.162] (II) AMDGPU(0): Manufacturer's mask: 0
[    21.162] (II) AMDGPU(0): Supported standard timings:
[    21.162] (II) AMDGPU(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    21.162] (II) AMDGPU(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    21.162] (II) AMDGPU(0): #2: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    21.162] (II) AMDGPU(0): #3: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    21.162] (II) AMDGPU(0): #4: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    21.162] (II) AMDGPU(0): #5: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    21.162] (II) AMDGPU(0): Supported detailed timing:
[    21.162] (II) AMDGPU(0): clock: 241.5 MHz   Image Size:  597 x 336 mm
[    21.162] (II) AMDGPU(0): h_active: 2560  h_sync: 2608  h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 21.162] (II) AMDGPU(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0

To upgrade gpu-firmware-amd-kmod-dcn-3-1-5, you need:
Code: 
pkg delete gpu-firmware-amd-kmod-dcn-3-1-5-20230625_2
cd /usr/ports/graphics/gpu-firmware-amd-kmod
make FLAVOR=dcn_3_1_5 patch
#copy new amdgpu/dcn_3_1_5_dmcub.bin
cp ~/amdgpu_dcn_3_1_5_dmcub.bin /usr/ports/graphics/gpu-firmware-amd-kmod/work-dcn_3_1_5/drm-kmod-firmware-20230625_8/amdgpukmsfw-files/dcn_3_1_5_dmcub.bin
make FLAVOR=dcn_3_1_5 install
# I am have installation error, but need only amdgpu_dcn_3_1_5_dmcub_bin.ko. Save to somewhere.
cp /usr/ports/graphics/gpu-firmware-amd-kmod/work-dcn_3_1_5/stage/boot/modules/amdgpu_dcn_3_1_5_dmcub_bin.ko ~/
# Reinstall gpu-firmware-amd-kmod-dcn-3-1-5
portmaster graphics/gpu-firmware-kmod@dcn_3_1_5
# OR
# portmaster graphics/gpu-firmware-amd-kmod
# Update /boot/modules with new saved amdgpu_dcn_3_1_5_dmcub_bin.ko
cp ~/amdgpu_dcn_3_1_5_dmcub_bin.ko /boot/modules/amdgpu_dcn_3_1_5_dmcub_bin.ko
kldload amdgpu
...

UPD:
You can try, without delete pkg. I think have worked:
Code: 
cd /usr/ports/graphics/gpu-firmware-amd-kmod
make FLAVOR=dcn_3_1_5 patch
#copy new amdgpu/dcn_3_1_5_dmcub.bin
cp ~/amdgpu_dcn_3_1_5_dmcub.bin /usr/ports/graphics/gpu-firmware-amd-kmod/work-dcn_3_1_5/drm-kmod-firmware-20230625_8/amdgpukmsfw-files/dcn_3_1_5_dmcub.bin
make FLAVOR=dcn_3_1_5
# copy amdgpu_dcn_3_1_5_dmcub_bin.ko to /boot/modules/
cp /usr/ports/graphics/gpu-firmware-amd-kmod/work-dcn_3_1_5/stage/boot/modules/amdgpu_dcn_3_1_5_dmcub_bin.ko /boot/modules/amdgpu_dcn_3_1_5_dmcub_bin.ko
...
kldload amdgpu
...
 
astyle said:
I can confirm that following the above instructions worked wonders for me and my Ryzen 5 7600.
Click to expand...
Great! I take it that you're mainly on -CURRENT because of these graphics issues. As you're using drm-61-kmod this might very well be an equally working solution on stable/14 and releng/14.2.

As this is now confirmed for two different zen 4 CPUs and the Partially revert "amdgpu: DMCUB updates for DCN 3.1.4 and 3.1.5" is from Wed, 5 Jul 2023, then, IMO, it should be reviewed (if that has not happened already) and evaluated if this can be integrated in FreeBSD ports.
 
Erichans said:
I take it that you're mainly on -CURRENT
Click to expand...
I'm actually on 14.2-RELEASE... that's where I did that patching. The FreeBSD installer for 14.2-RELEASE actually asked me if I want to install those AMDGPU modules from pkg. And now I know the answer is 'No', at least for my hardware, at least for now.

The patching that helped me so much - it is best done in /usr/ports, I'd think. I also checked the git history of that commit/revert update, and discovered that this DMCUB / DCN 3.1.4/3.1.5 module was not touched afterwards. Well, it should not be impossible to create a Raphael-flavored package for FreeBSD at this point!
1735339164603.png

(That's the Italian painter in whose honor AMD named this version of graphics tech!)
 
Just a Public Announcement:

BTW, just a heads up about downloading .bin files: Make sure they actually get downloaded as binary files! The correct URL for the DCM file in this conversation is:
https://git.kernel.org/pub/scm/linu...firmware.git/plain/amdgpu/dcn_3_1_5_dmcub.bin (note the 'plain' substring in the URL!).

If Konqueror (or another browser) doesn't show that it's downloading a binary, as shown in this screenshot, the file won't work!
 

Attachments

  • binary_download.png
    binary_download.png
    48 KB · Views: 20
Efreet said:
I also faced the problem of supporting the new iGPU for AMD Ryzen 7 9700x.
After installing graphics/drm-61-kmod and graphics/gpu-firmware-kmod-amd, I load amdgpu.ko
The screen turned off, but the SSH system was available.

I tried to install different options gpu-firmware-kmod-amd, but this did not help.
After that, I installed all firmware files for all graphics card - installed graphics/gpu-firmware-kmod.
This also did not help. There were errors in the logs.

Code: 
[drm ERROR :dc_dmub_srv_cmd_queue] Error queuing DMUB command: status=2
[drm ERROR :dc_dmub_srv_wait_idle] Error waiting for DMUB idle: status=3
By this error, I found a solution to the problem here issues/2666
I took the corrected file amdgpu/dcn_3_1_5_dmcub.bin here amdgpu/dcn_3_1_5_dmcub.bin

I compiled gpu-firmware-amd-kmod-dcn-3-1-5 with this "amdgpu/dcn_3_1_5_dmcub.bin". After that, everything worked fine.
Xorg.0.log (part)
Code: 
[    21.145] (II) AMDGPU(0): glamor X acceleration enabled on AMD Radeon Graphics (radeonsi, raphael_mendocino, LLVM 15.0.7, DRM 3.49, 14.2-RELEASE)
[    21.145] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[    21.145] (==) AMDGPU(0): TearFree property default: auto
[    21.145] (==) AMDGPU(0): VariableRefresh: disabled
[    21.145] (==) AMDGPU(0): AsyncFlipSecondaries: disabled
[    21.145] (II) AMDGPU(0): KMS Pageflipping: enabled
[    21.145] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[    21.147] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[    21.147] (II) AMDGPU(0): Output DisplayPort-1 has no monitor section
[    21.160] (II) AMDGPU(0): EDID for output HDMI-A-0
[    21.161] (II) AMDGPU(0): EDID for output DisplayPort-0
[    21.161] (II) AMDGPU(0): Year: 2024  Week: 14
[    21.161] (II) AMDGPU(0): EDID Version: 1.4
[    21.161] (II) AMDGPU(0): Digital Display Input
[    21.161] (II) AMDGPU(0): 10 bits per channel
[    21.161] (II) AMDGPU(0): Digital interface is DisplayPort
[    21.161] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 60  vert.: 34
[    21.161] (II) AMDGPU(0): Gamma: 2.20
[    21.162] (II) AMDGPU(0): DPMS capabilities: Off
[    21.162] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
[    21.162] (II) AMDGPU(0): First detailed timing is preferred mode
[    21.162] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[    21.162] (II) AMDGPU(0): Display is continuous-frequency
[    21.162] (II) AMDGPU(0): redX: 0.666 redY: 0.328   greenX: 0.277 greenY: 0.665
[    21.162] (II) AMDGPU(0): blueX: 0.146 blueY: 0.050   whiteX: 0.313 whiteY: 0.329
[    21.162] (II) AMDGPU(0): Supported established timings:
[    21.162] (II) AMDGPU(0): 720x400@70Hz
[    21.162] (II) AMDGPU(0): 640x480@60Hz
[    21.162] (II) AMDGPU(0): 640x480@67Hz
[    21.162] (II) AMDGPU(0): 640x480@75Hz
[    21.162] (II) AMDGPU(0): 800x600@56Hz
[    21.162] (II) AMDGPU(0): 800x600@60Hz
[    21.162] (II) AMDGPU(0): 800x600@75Hz
[    21.162] (II) AMDGPU(0): 1024x768@60Hz
[    21.162] (II) AMDGPU(0): 1024x768@70Hz
[    21.162] (II) AMDGPU(0): 1024x768@75Hz
[    21.162] (II) AMDGPU(0): 1280x1024@75Hz
[    21.162] (II) AMDGPU(0): Manufacturer's mask: 0
[    21.162] (II) AMDGPU(0): Supported standard timings:
[    21.162] (II) AMDGPU(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    21.162] (II) AMDGPU(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    21.162] (II) AMDGPU(0): #2: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    21.162] (II) AMDGPU(0): #3: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    21.162] (II) AMDGPU(0): #4: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    21.162] (II) AMDGPU(0): #5: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    21.162] (II) AMDGPU(0): Supported detailed timing:
[    21.162] (II) AMDGPU(0): clock: 241.5 MHz   Image Size:  597 x 336 mm
[    21.162] (II) AMDGPU(0): h_active: 2560  h_sync: 2608  h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 21.162] (II) AMDGPU(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0

To upgrade gpu-firmware-amd-kmod-dcn-3-1-5, you need:
Code: 
pkg delete gpu-firmware-amd-kmod-dcn-3-1-5-20230625_2
cd /usr/ports/graphics/gpu-firmware-amd-kmod
make FLAVOR=dcn_3_1_5 patch
#copy new amdgpu/dcn_3_1_5_dmcub.bin
cp ~/amdgpu_dcn_3_1_5_dmcub.bin /usr/ports/graphics/gpu-firmware-amd-kmod/work-dcn_3_1_5/drm-kmod-firmware-20230625_8/amdgpukmsfw-files/dcn_3_1_5_dmcub.bin
make FLAVOR=dcn_3_1_5 install
# I am have installation error, but need only amdgpu_dcn_3_1_5_dmcub_bin.ko. Save to somewhere.
cp /usr/ports/graphics/gpu-firmware-amd-kmod/work-dcn_3_1_5/stage/boot/modules/amdgpu_dcn_3_1_5_dmcub_bin.ko ~/
# Reinstall gpu-firmware-amd-kmod-dcn-3-1-5
portmaster graphics/gpu-firmware-kmod@dcn_3_1_5
# OR
# portmaster graphics/gpu-firmware-amd-kmod
# Update /boot/modules with new saved amdgpu_dcn_3_1_5_dmcub_bin.ko
cp ~/amdgpu_dcn_3_1_5_dmcub_bin.ko /boot/modules/amdgpu_dcn_3_1_5_dmcub_bin.ko
kldload amdgpu
...

UPD:
You can try, without delete pkg. I think have worked:
Code: 
cd /usr/ports/graphics/gpu-firmware-amd-kmod
make FLAVOR=dcn_3_1_5 patch
#copy new amdgpu/dcn_3_1_5_dmcub.bin
cp ~/amdgpu_dcn_3_1_5_dmcub.bin /usr/ports/graphics/gpu-firmware-amd-kmod/work-dcn_3_1_5/drm-kmod-firmware-20230625_8/amdgpukmsfw-files/dcn_3_1_5_dmcub.bin
make FLAVOR=dcn_3_1_5
# copy amdgpu_dcn_3_1_5_dmcub_bin.ko to /boot/modules/
cp /usr/ports/graphics/gpu-firmware-amd-kmod/work-dcn_3_1_5/stage/boot/modules/amdgpu_dcn_3_1_5_dmcub_bin.ko /boot/modules/amdgpu_dcn_3_1_5_dmcub_bin.ko
...
kldload amdgpu
...
Click to expand...
Question: turns out my AMD PRO W5500 :

Graphics/Compute: 10.1.1
Shader ISA: GFX10.1 (gfx1012)
Display Core Next: 2.0.0
Video Core Next: 2.0.2
System DMA: 5.0.2
Platform Security Processor: 11.0.5

Does newer versions covers older versions or i have to get specific ones ? My issue is blank screen on 61 , but very laggy, slow, artifacts on amd-kmod.
 
GlitchyDot said:
Question: turns out my AMD PRO W5500 :
Code: 
Graphics/Compute: 10.1.1
Shader ISA: GFX10.1 (gfx1012)
Display Core Next: 2.0.0
Video Core Next: 2.0.2
System DMA: 5.0.2
Platform Security Processor: 11.0.5
Does newer versions covers older versions or i have to get specific ones ? My issue is blank screen on 61 , but very laggy, slow, artifacts on amd-kmod.
Click to expand...
I think you do have to get specific stuff, and to pay attention.

Initially, I thought that just putting together appropriately named/versioned modules is enough - it wasn't.

I had no idea that this was due to the simple fact that the module I needed - a buggy version of it was packaged in graphics/gpu-firmware-amd-kmod. If not for this thread, I'd probably be still stuck with llvmpipe...
 
astyle said:
I think you do have to get specific stuff, and to pay attention.

Initially, I thought that just putting together appropriately named/versioned modules is enough - it wasn't.

I had no idea that this was due to the simple fact that the module I needed - a buggy version of it was packaged in graphics/gpu-firmware-amd-kmod. If not for this thread, I'd probably be still stuck with llvmpipe...
Click to expand...
Yeah you right, version 2 is different from version 3 according to AMD`s tech pages.
 
You must log in or register to reply here.
Back
Top