wireless

Hey! So this is my second thread on the FreeBSD forums, and I'm trying to get the USB-AC51 by ASUS to work in FreeBSD. In the FreeBSD 10.1-RELEASE release notes, it says that "urtwn(4) has been updated to support the ASUS USB-AC51", so it's supposed to be working. I've tried putting...

Hi all, I have a set network aliases in /etc/rc.conf to use them in my jails. # Adding alias for wlan0 for jails ifconfig_wlan0_alias0="inet 192.168.0.100 netmask 0xffffff00 broadcast 192.168.0.255" ifconfig_wlan0_alias1="inet 192.168.0.101 netmask 0xffffff00 broadcast 192.168.0.255"...

I have asked a similar question in this thread(59187#post-342471) but I'm not the author of the thread so I figure a new thread would be a good idea. My laptop comes with Qualcomm Atheros QCA9377 wireless card and I have all the reason to believe that it will not be supported well through its...

Need some help with getting my RasPi working. I have everything setup and the OS sees the device. rum0: <Ralink 802.11 bg WLAN, class 0/0, rev 2.00/0.01, addr 6> on usbus0 rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528 ifconfig wlan0 wlan0...

Hello, I'm on 11-RELEASE on my Lenovo T430 laptop. I have some trouble to get the wireless network to work. The weird part is, that it works in rare occations. So every 50th boot or so, it connects to my AP just fine. However, rebooting or restarting or changing the interface will break the...

Dear FreeBSD Support forum, I didn't want to ask for help about this topic as there is No Supported Hardware involved, but I will appreciate some help, the scenario is like this: Have a Dell Precision T7400 with FreeBSD RELEASE 11 installed and I did try to setting up a few wireless USB cards...

Hello, I am running FreeBSD 11 RC1 on a raspberry pi 2. I have a urtwn usb wifi device. I can get it associated with my access point, but it just won't seem to send/receive any traffic: not DHCP packets, and not pings if I configure it statically. # uname -a FreeBSD rpi2 11.0-RC1 FreeBSD...

Sorry if this is a little choppy, I pieced together two different discussions I had on the mailinglist. I currently have all the iwn options enabled(that im aware of) and built into the kernel. In my /etc/rc.conf file I have wlans_iwn0="wlan0" ifconfig_wlan0="-ht WPA SYNCDHCP" Ok without...

Hi, I have a TL-725n v2 that I'm using with the urtwn driver. The OS is FreeBSD 10.3 amd64, p5. It connects to the network successfully for about 10-15 mins, and everything works during this period. However, eventually the connection is dropped, the green led goes off, and then it never recovers...

Hi there, I am looking for a C API that would let me interact with my wireless NIC (such as listing available SSIDs etc...)? Well, a bit of googling revealed there is no API high level APIs in FreeBSD. I had a quick look at some of the code in /usr/src/sys/net80211, but I really would...

Hi, I have a laptop with an rtl8723be wireless adapter. I have been searching in Internet how to use it. I only have found references for linux systems, but I have not found for freebsd. It is possible use RTL8723BE adapter in FreeBSD? Please help, I need the wireless conection.

FreeBSD 11.0-CURRENT I am desperately trying to get wireless networking up and running. Everything appears correct; however, the network is never brought UP. I have tried "service netip restart" and rebooting the system, but nothing works. ifconfig wlan0 list scan ifconfig: interface wlan0...

Hi, yesterday I installed FreeBSD 11.0-CURRENT and wanted to set up my wifi. I have a Broadcom BCM4313 and I read googleing there were some problems attempting to get this card working with the net/bwn-firmware-kmod, so some people used ndis to use the Windows' drivers. Because I wouldn't like...

When I run pkg install en-freebsd-doc or try to install any other package I get this: The package management tool is not yet installed on your system. Do you want to fetch and install it now? [y/N]: y Bootstraping pkg from pkg+http://pkg.FreeBSD.org/FreeBSD:10:amd64/quarterly. please wait...

Hi, I'm trying to get my wireless working in my FreeBSD 10.2 for my work and I don't know exactly what's happening (maybe there's a bug in the ath driver for my card). I'm attaching the results of dmesg | grep -i 'ath'Some help will be appreciated. Many thanks.

Hi there, I was looking for a budget friendly, double-sided, wireless, laser printer and found this one today (and they have $30 cashback - yay! ) https://www.brother.co.nz/Public/ViewProduct/HLL2365DW Has anybody had any experience with wireless printers and especially with this model? In...

Using ESP8266 embedded wireless boards, I've built a few wireless temperature and humidity sensors. While researching this, it appeared that MQTT was the protocol to use for this type of data. So right now, net/mosquitto is receiving the data from these sensors. With the included MQTT client...