usb

Hi all, When I accidentally move the cable, the mounted drive is disconnected for an instant. And ls gives: % ls mymountpoint ls: mymountpoint: Device not configuredSo I unplug the device, and try to unmount it: # umount -f mymountpoint umount: mymountpoint: statfs: Device not configured...

Hello. Apologize for my ignorance. But, does something of this work for LXDE or XFCE?

What am I doing wrong with this Kingston USB drive formatted with FAT32 under Win7? [leo@leo00] ~> lsusb Bus /dev/usb Device /dev/ugen3.3: ID 0930:6545 Toshiba Corp. Kingston DataTraveler 2.0 Stick (4GB) / PNY Attache 4GB Stick ... [leo@leo00] ~> sudo camcontrol devlist... <Kingston...

Hi all, I’m testing an external USB drive as a one-off backup. I can send / recv without any problem. However, as soon as I reattach the USB drive again, the datasets are mounted on the same paths. Not a fun place to be in. I could set the canmount property after the receive but I’m wondering...

I just tried to get a On Networks N300MA usb network adapter working with the urtwn driver. The card is a Netgear rebrand (or produced under a license from Netgear), it supposedly has a Realtek RTL8192 chipset. usbconfig says: root@kg-z30b# usbconfig -d ugen0.2 dump_device_desc ugen0.2...

First post:rolleyes: I wanted to try FreeBSD on my PC but it's giving me trouble. The PC is relatively new, Gigabyte GA-Z170X-Gaming 7, 32GB DDR4 with Core i5-6600K. BIOS is set to defaults, no overclock. Memory has been tested overnight, 4 complete passes no faults. System has been...

I am trying to use FreeBSD as my main desktop. I previously used Debian Linux. I have FreeBSD 10.2 AMD 64-bit installed. What I did # pkg search ntfs fusefs-ntfs-2015.3.14_2 Mount NTFS partitions (read/write) and disk images ntfsprogs-2.0.0_5 Utilities and library to...

Hi all, I'm trying to boot FreeBSD 10.2 from a USB device that I used as the install destination from a liveCD installer. I performed the installation on another system, specifying the flash disk (Patriot XPorter 16GB) as the install target and am now trying to boot a small fileserver from...

Hello :) I have a problem regarding USB and SD card reader : USB : automount works very well but I must be root to write or clear something, else I can just read. SDCARD : sometimes automount works, and sometimes not. When It works, it is just readable and I must be root to write or erase...

Good afternoon all, I've noticed that there is a BIOS update for my Lenovo T440. The download is an ISO file which strikes me as a little odd since the laptop doesn't have an optical drive... My first thought was to install syslinux onto a USB stick, loopback mount the ISO and copy the files...

Hi, I've been playing with the Linuxulator in an attempt to be able to do FPGA programming entirely in FreeBSD. I have the Altera Quartus software (which is unfortunately only provided as a Linux binary) running fine now after much work, mainly in installing libraries manually before I realised...

Hi, I downloaded an 2,7 GB ISO image and copied to a pen drive formatted as ext2. The copying progress started with a write speed of 3 MB/s and went slower and slower and ended with a write speed of 627 KB/s. The copy process took me 47 minutes and I decided to test the write speed of Debian...

Hi all, this is my first experience in the BSD world, I want to install FreeBSD 10.2 on this old machine: HP Compaq dc5850 AMD Athlon(tm) Dual Core 4450B @ 2300Mhz 5gb DDR2 RAM 250gb Seagate HDD NVIDIA Quadro FX 1500 256MB I downloaded FreeBSD-10.2-RELEASE-amd64-memstick.img and wrote it to...

Hi! I'm having troubles trying to communicate to an USB device (usb2serial cable attached to a VantagePro2). It seems I'm not understanding how devfs works. This is the ruleset I created for the jail: [devfsrules_jail_allow_usb=10] add include $devfsrules_hide_all add include...

Hello, I'm new here. I've the following problem: I want to integrate a Card Reader (SPR 532) to my virtual FreeBSD-machine. I installed: - devel/pcsc-lite - security/engine_pkcs11 - devel/libccid - security/ifd-slb_rf60 - security/opensc I did all changes included in...

I'm using a Proxmox VE guest (FreeBSD 10.2) which I've given access to the server's USB port containing the plugged USB dongle. I think I've done that bit correctly, and seems I've located the drive on the FreeBSD guest at usbus4, address 2 as usbconfig -u 4 -a 2 dump_info shows the correct...

Hardware: Brand new Raspberry Pi B+ Software : FreeBSD-10.1-STABLE-arm-armv6-RPI-B-20150217-r278906.img.bz2 dd'd the uncompressed img file to an 8GB micro sdCARD, inserted into RPB+, applied power - green LED goes out within 1-2 seconds. Nothing appears to be happening. Note 1: The FreeBSD...