usb

Hello, I need 4G cellular internet USB modem, that is NOT android and not vendor-locked. If modem is not android, its probably using AT commands which are universally work on FreeBSD and Windows. Why not android modem? First, I need precise control of parameters, which, of course, android...

Hello! Recently migrated from now unsupported FreeBSD 12 to the recent FreeBSD 14 and faced an issue with USB. I'm not able to mount a storage located on the ebook reader connected via USB anymore. Fragment from kernel messages: usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass...

I am trying to get my iPhone to connect to my FreeBSD-14.1p5 desktop. I get repeated pings from the iPhone while tethered but no prompt to authorize the connection. In /var/log/messages I see these: Oct 16 09:48:50 vhost01 kernel: usbd_setup_device_desc: getting device descriptor at addr 124...

I understand that this might not be viewed very favorably, but I couldn't really find much about this. I read a few threads on this Forum about USB/IP but there doesn't seem to be much support for the protocol on BSD? I'm trying to create a VM to which most of my USB ports will be passed...

I've got an issue I am at a bit of a loss with. Wondering if anyone can offer any insight, maybe I'm missing something simple or it's a known issue. My issue is that my USB mouse and keyboard seem to be going completely unresponsive upon starting X. I can't figure out if it's USB or the display...

When I booted FreeBSD my USB keyboard wouldn't work. Num Lock light was on and wouldn't respond to Num Lock toggle presses. Unplugging and plugging the USB keyboard back just produced the same situation, Num Lock diode stuck in on mode, nothing working. So I stopped using FreeBSD as my desktop...

Hello! I searching for a way to disable bluetooth when i don't need it. i can power off bluetooth with usbconfig, but after reboot or suspend/resume bluetooth (or any usb things) turning on, so I added a line to devd.conf to power off after resume: usbconfig -d ugen0.3 power_off normally my...

Is there a way to configure a usb based swap and plug it into my pfSense system and edit the folder pointing to /etc/fstab for the usb swap and use that? I have a 128GB ssd but the software didn’t configure a swap. My compex WiFi card is crashing and going into system panic when it runs full...

Hi, I am new to FreeBSD and use it at work. We use a stripped version of FreeBSD11.4-RELEASE (the person that stripped it is not around) and so, do not hesitate to tell me what "might" be missing or what "might" be different in our stripped version. I need to mount a FAT32 usb stick. The...

So this might be strange post but FreeBSD disconnects my usb ports from power. So as im tinker and like to overcomplicate a lot i decided to make usage of old chromebook which i've bought. I installed MrChromebox custom firmware and succesfully booted and setup my beloved arch linux (I USE ARCH...

Hello, a while ago I tried to install FreeBSD on my 2006 computer (which model is an HP Compaq 6720s) although I have a problem, and that is that when the installation starts, when I click "boot multi-user" or "boot single -user" then after those numbers appeared below the ASCII art, the screen...

I've inserted a 128Gb USB Memory Stick and destroyed the previous formatting with gpart destroy -F /dev/da0 I want to create 4 off 30Gb FAT32 partitions, so I then rebuilt the structure: gpart create -s mbr /dev/da0 gpart add -s 30G -t fat32 /dev/da0 gpart add -s 30G -t fat32 /dev/da1 gpart...

Hi freebsd users, this is my first time using freebsd as desktop with gnome 42.4, windows system X11, FreeBSD 13.2-RELEASE-p2 OS. I'm feeling lucky the system is great :) . My issue is with USB key "Free", when I unmount the USB by the button, the famous message "Device can be removed"...

I have a HPE microserver Gen10 server running FreeBSD13.2 and a APC bk650M2 ch UPS which offers a rj45 to usb cable to connect to my Gen10. NUT 2.8.0 installed by pkg running on Gen10 works well: - system poweroff works well when power is outage and battery.charge is lower than...

I have a HPE microserver Gen10 server running FreeBSD13.2 and a APC bk650M2 ch UPS which offers a rj45 to usb cable to connect to my Gen10. NUT 2.8.0 installed by pkg running on Gen10 works well: - system poweroff works well when power is outage and battery.charge is lower than...

My ZFS server uses a USB Ethernet adapter as it's principal NIC. It enumerates as ue0. There's a sequencing issue with booting. All the PCIe bus NICs enumerate as expected, but ue0 is unresponsive early in the boot sequence. I have experienced "time to enumerate" issues with USB NICs on...

Hello, For years, since FreeBSD 10.x, I have been booting my router with a custom built nanobsd image, from a USB Flash drive. It has worked fine with a motherboard having an Intel Atom N270 CPU, then until now, with another motherboard having an Intel Atom N2800 CPU. My nanobsd image is based...

Hello to everyone. This is my first post to the forums :) I am trying to make a USB device (XGecu T48) work under FreeBSD inside a 32bit jail (13.2-RELEASE). For this, I am required to use libusb to communicate with the device. I can observe that the USB device can be opened in the host system...

Hi There, Not sure if this is a bug I found but I have a strange situation when using my usb headset on GhostBSD where I assume the problem is present in the FreeBSD system Ghost leans on. First some additional info: cat /dev/sndstat Installed devices: pcm0: <Realtek ALC1220 (Rear Analog...

Hello. I've read this article and found it usable. I want to make one port of my home router to be a serial one, but didn't found how to make it with just one usb port? Some ports are seized by HDD's already. Can somebody tell me the truth? Thank You.