networking

  1. K

    Wireguard is not working

    Keep in mind I set up a wireguard server and 3 ubuntu clients. we wg0.conf [Interface] PrivateKey = private.key address = 11.11.11.6/32 DNS = 8.8.8.8 [Peer] PublicKey = publicserver.key AllowedIPs = 0.0.0.0/0 Endpoint = serverip:51820 PersistentKeepalive = 15 rc.conf wireguard_enable="YES"...
  2. jschmidt3786

    This might be a routing question, I'm not really sure...

    I'm trying to emulate some functionality from a previous linux-based OpenVPN solution onto a new FreeBSD-based OpenVPN solution with different IP ranges. Old VPN network: 10.0.0.0/8 (there are lots of smaller customer ranges within for isolation) New VPN network: 172.29.0.0/16 (ditto)...
  3. gondola

    Issues with connecting to a WPA2-EAP network, with MSCHAPv2 and TTLS

    Hi all, I'm having an issue with connecting my FreeBSD laptop (with an Intel 7260 chipset) to my school's wifi. I have no issues using it with my home (wpa2) wifi, and I have had no issues on with the school wifi on linux. I'm connecting with wpa_supplicant and wpa_gui. The laptop in particular...
  4. I

    bhyve How do I make jailed bhyve VMs talk to each other?

    I'm trying to set up "vnet" jailed bhyve VMs which can talk to each other. Below is my jail .conf file: jailname100 { $if = 100; exec.prestart = "/sbin/ifconfig epair${if} create up"; exec.prestart += "/sbin/ifconfig epair${if}a up"; exec.prestart += "/sbin/ifconfig epair${if}a name...
  5. D

    Missing rtwn0 device

    I'm installing fbsd 13.3 on a new asus box. It has a realtek 8821a wlan device. After boot there is no device, either rtwn0 or wlan0 or any other flavors of this interface. The *.ko are present on /boot/kernel: rtwn.ko, if _rtwn_pci.ko, if_rtw88.ko. So I can't create rtwn0 or wlan0 or any...
  6. M

    jails Unexpected behavior with Jail on Plex

    I am on 13.2 FreeBSD. I use Bastille to create the jail. I used ix1 as my interface. ix0 is the 'LAN' host interface. I can reach the http://<ip>:32400/web interface and configure all that. However, when I play something it doesn't seem to play. From what I gather is that it might be...
  7. JT42

    Solved Networking broken after upgrade to 14.0-RELEASE-p5

    After upgrading from 13.3 to 14.0, all networking has stopped working. I can ping the local IP address but can't ping anything else via IPv4 or IPv6. The output of ifconfig looks okay to me for interface re0, but maybe I'm missing something. Any thoughts?
  8. G

    Solved DHCPDISCOVER on wlan0 loop while booting

    Hello. I'm pretty new to FreeBSD after having using GNU/Linux for more than a decade. I've installed FreeBSD 14.0 (MATE desktop) on an rather old Samsung AMD A6-3420m apu with radeon hd graphics (AMD Sumo 512 MB) and 4GB ram. Everything went fine, but after booting one time, only to discover...
  9. R

    SSL handshake failed for opn-cli

    I got this error during my SSL handshake for opn-cli during data fetching and I got this error at that time so please help or give me some guidance for it how to resolve.
  10. S

    Wifi not working

    plz help my friend installed feebsd on my computer does anyone know why my wifi isnt working i tried all the drivers here are the pages from the microsoft site: https://support.hp.com/us-en/drivers/selfservice/hp-15-e1000-laptop-pc-series/32612084/model/35335672 also does anyone know where...
  11. madwebness

    jails Isolating host-machine & sending traffic through a jail-proxy

    While I'm relatively new to FreeBSD, I took my time to first study it (read quite a few books, including the ones on networking and jails) and then I took about 2 months trying to create a perfect workstation for myself, but so far I was unsuccessful in my attempts to do it according to my...
  12. ppbitb

    general/other Infrastructure design of Ruby on Rails application.

    Hey folks. I have a small hobby website which has been running for the past 15 years. It is a Ruby on Rails application. The architecture is nginx proxying to unicorn which wraps the ruby codebase. There are also a couple Resque processes (leveraging Redis) to handle async jobs which need...
  13. Z

    Create own proxy server on FreeBSD using Stunnel and 3proxy software with public key cryptography verification between the Stunnel server and Stunnel.

    This topic provides a solution on how to make own Proxy serwer, on a FreeBSD operating system, using Stunnel validated with public-key cryptography between Stunnel server and Stunnel client, for use by a web browser. The primary benefit is that, unlike other VPN, the client does not require...
  14. Sergei_Shablovsky

    BSD-based fw/router: ZFS on SSD RAID10 efficiency

    Hi FreeBSD Gurus! In case using bsd-based bare metal rack server as a gate fw/router: 1. How effectively would be using ZFS (in comparison to GPT, etc) file system in hardware RAID10 (4 of SSD TLC/MLC drives) ? 2. Is separating of /var, /tmp (also may be /usr) to another disk's logical volume...
  15. L

    Need some help with epair / bridge for multiple Jails

    The Goal Run many jails that each serve their own ssh. I got about as far as getting the jails running and then hit a wall with networking. It seemed simple enough going in but I'm completely crashing and burning for some reason. Any help would be appreciated. The Configuration details The...
  16. C

    bhyve Bhyve VM in localnetwork

    Hello, I have a question. I would like to run a virtual machine in bhyve HomeAssistant OS. However, I would like this virtual machine to be on the same subnet as the LAN network (hq0). I used the following solution, but something is not working. The DHCP server is dnsmasq (the DHCP interface is...
  17. C

    Solved PF NAT on one interface.

    Hello, I have a request. I need to set up NAT on one interface. I am using two addressing schemes in one network: 192.168.2.0/24 and 192.168.8.0/24. This was done previously and I cannot change it at the moment. The router, which is based on FreeBSD, has an address of 192.168.2.1 and an alias on...
  18. G

    FreeVRRPd not working with VLAN subinterfaces

    Hi there. As a precursor to my issue, here's a couple of files to reference: I should note this is the BSDRP image. /etc/rc.conf: hostname="BSDRP-RTR-01" frr_daemons="zebra bgpd ospfd staticd pbrd" frr_enable="yes" autosave_enable="yes" # Ifconfig_igb1="DHCP" sshd_enable="yes"...
  19. D

    Solved Jailed ping(8) can not resolve names using hosts unbound(8), but host(1) and drill(1) can

    EFFECT drill resolves r0.z201 correctly to 192.168.201.1. host resolves r0.z201 correctly to 192.168.201.1. ping works when given argument 192.168.201.1. ping doesn't work when given argument r0.z201. (fails to resolve) OBSERVATIONS When using truss I can see that ping does...
  20. 1

    How to use DummyNet on Red Hat?

    I am considering DummyNet for generating network failures for testing on Red Hat. My goal is to develop a program to handle clustering interruptions, and my development environment currently consists of two Red Hat virtual machines as cluster members. However, DummyNet seems native to FreeBSD...
Back
Top