nat

At an office, a FreeBSD router is set up using ipfw and nat. This part works great and has for years. We added an ipsec tunnel for a remote network. I have the tunnel up, and can ping from the internal interface (em1 172.31.0.200) to the remote IP 10.4.4.4, no problem. For the nat, I set up...

Good day everyone! Can't beat the following problem. Internet -> router (x.x.x.x/192.168.1.1) -> ASC server {FreeBSD12+ipfw/nat/fwd (192.168.1.12|If_Inet) + OpenVPN server (192.168.101.1|If_VPN)} -> ADM server {OpenVPN client (192.168.101.6|If_VPN) + FreeBSD12 www-server (Ip_WWW)} ->...

I do not have a static IP for my computer connected by fiber to home. My ISP assigns an IP address by DHCP, is there a way of making my ISP's router at my home remember the address assigned to me by local settings? I do not fully understand but this URL to a how-to guide points to a method...

Hi, everyone. Seems like between the times I DO the PF config, I forget something very important :) Anyway. My box has 3 NICs. There is WAN and LAN ethernets, then there is a WIFI AP managed by hostapd. And here is my /etc/pf.conf: out_if = "igb0" lan_if = "igb1" wifi_if = "wlan0" nonroute =...

I am attempting to create a virtual network on VMware using FreeBSD as a router and a firewall. I am relatively new to many of the concepts involved here. I have FreeBSD currently setup as a DHCP server on my vlan(I will eventually switch to static networking), it is issuing addresses on a...

I have an issue forwarding the packets to the cloud from the jail. I have tested Netgraph and epair with the same result. I have enabled nat in sysctl.conf>> net.inet.ip.forwarding=1 I have disabled PF totally and tried with nat enabled nat on $ext_if inet from $jail_if to any -> ($ext_if) In...

Hi, i have trouble with Ipsec & pf enc0 nat problem . I show you my problematic scenerio below any help would be appreciated at this point STRONGSWAN CONFIGURATION alfa7000 { fragmentation = yes unique = replace version = 1 aggressive = no proposals...

Hello everyone ! I need to port forward 3074 from destination external device (tun0) to internal device which (em0) but I need it using ppp nat. I enabled ppp nat in rc.conf and it masquerade tun0 device from internal device now I need to port forward I tried with PF but it gives me strict nat...

HTTP(S) is just an example, I have many other services that wouldn't be able to communicate the real IP via a proxy, therefore PF solution is a must. I am referring to RDR and NAT as they are understood in the context of pf.conf (i.e. I mean the RDR and NAT statements). Both my VPS and Home...

I'm trying to pass all outbound traffic from Jails. I'm using IPFW, because it's default for FreeBSD. All Jails live on cloned lo1 interface, no VNET. How can I pass all outbound traffic from my Jails to the Internet through vtnet0 interface? PLEASE DELETE THIS THREAD.

I guess I should probably start by explaining what I'm trying to do. I have a pair of Grandstream HandyTone analog telephone adapters that I need to work with incoming and outgoing calls to a SIP trunking provider over Asterisk running on a remote FreeBSD server. The ATAs are behind NAT, the...

I have: a router - with an internal IP address 192.168.1.1 and is connected to the Internet. a Mac - has the IP address of 192.168.1.10. Internet works, of course. a PC with FreeBSD 13 installed. I have connected the FreeBSD PC to the Mac using an Ethernet crossover cable. I have assigned...

I am using PF and cannot get packets forwarded to a particular jail. I want data that comes into my base machine on port 4243 to be forwarded to my jail that has a service that is listening on port 4243. I have verified with telnet that the jail can receive data on that port. Here is my...

Hi, I'd wish to read and understand the source code used for tracking connection and feeding NAT. May someone point me to the right place in the source tree? Thanks, Claudio

I'm running an AP that bridges traffic to my ISP. For various reasons, I'm running both IPv4 and IPv6 and I need to NAT traffic from the LAN to the ISP. For this reason, net.inet6.ip6.forwarding needs to be enabled. The usual solution for periodically updating the IPv6 gateway address seems to...

I have an AP+bridge+firewall ("router") running FreeBSD 12.2-RELEASE r366954 GENERIC amd64. It's roughly set up as follows: - igb0 connects to my ISP via DHCP. (Disabled while I debug this.) - bridge0 has dnsmasq running on it as a DHCP server and DNS server. (Only dynamic addresses at the...

I run into difficulties configuring OpenVPN server and client. Here is my setup: OpenVPN server on FreeBSD 12 server.conf port 1194 proto tcp dev tun...

Hello, First I wanted to give a shout out to everyone who has posted other problems and responses over the years - the knowledge base has helped tremendously. I'm here today to ask for pointers regarding IPFW and natd. Some background: I have a very old server that runs a business and is due...

I am a new user of FreeBSD and I managed to install it on virtualbox as a guest after failing to install it directly on my laptop. I will do that after I gain confidence in FreeBSD on virtualbox. However after installation I am unable to access internet from the Guest FreeBSD. I have looked...

Hello, I'm trying to setup jails on a Digital Ocean droplet by following the instructions in the handbook: https://www.freebsd.org/doc/handbook/jails-ezjail.html The network configuration is like this: * vtnet0 with the external IP address, 10.10.0.5 netmask 0xffff0000 (Digital Ocean's...