intel

Hi, I am trying to make the igc driver (/usr/src/sys/dev/igc) to also support Killer Ethernet E3100G (which is an Intel I225-V chip which is supported by the driver). This is the status: 1. The device seems to be detected with wrong vendor and device name. dmesg says: none6@pci0:108:0:0...

Can't get the sound working on this Asus machine (hdac/realtek alc294) - dsp devices are busy but nothing is active in fstat user/root output (besides sndio sometimes). osstest (with virtual_oss): Sound subsystem and version: FreeBSD native OSS ABI 1301000 (0x00040000) Platform: FreeBSD/amd64...

Hey everyone! I have been struggling to get FreeBSD running on my Thinkpad T430 (which I have done in the past; I just don't remember how). I have since then formatted and have a new hard drive in. I have spent the last 72 hours re-installing versions ranging from 12.1 - 13.0 CURRENT (which is...

Hi i am trying to swicth suritaca NETMAP mode on FreeBSD 11.4 Release it requires RSS to work the number of netmap threads created depends on the number of RSS queues available on the NIC. The Intel I211 Ethernet Controller supports 2 Receive Side Scaling (RSS) queues. So how can i enable this...

Hello. For quite a while I've been dealing with a highly unstable wifi connection on 13.0 (and if its relevant I'm dual booting Windows 10 on another drive on the same machine). My motherboard has an intel 8265/8275 which from my understanding is supported by the iwm driver. The main issue is...

When I was using Linux I was able to select va-api & va-api copy from that list but these two options are missing under FreeBSD. What's the reason ?

The problem is I can start X with startx, but if I quit, the screen just goes black. I does not show TTY then. I own a thinkpad t440p. I run FreeBSD 12.2. My Xorg log https://pastebin.com/LK8RpqNL My /var/log/messages https://pastebin.com/51n3PH6L

Hello I've just installed FreeBSD 13.0 on a Lenovo Thinkpad M73 machine that comes with an Intel Haswell DT-GT 1.5 Integrated Graphics GPU (Intel HD Graphics 4400). I'm just wondering if i should download and install an appropriate driver or if the OS is supporting this GPU out of the box...

Hello All, I passed like one week searching to solve my problem of black screen on internal monitor on my laptop, under xfce 4.16/lightdm. the external monitor on DP work fine connected to the nvidia 1660 Ti card, the internal display no chance. I'm on FreeBSD 13 stable, I use the...

Hey! I have a noob question: When I install the package xf86-video-intel the XFCE is very slow in my computer. I uninstalled the xf86-video-intel and opened the Xorg log file and the "intel" option returned a error, but xfce starts fast and without a problem. With the xf86-video-intel package...

I'm experimenting bhyve with virtualized FreeBSD guests. Host system: FreeBSD 13 with 8 GB or RAM on Intel chip. On installation, there is a message that says ZFS tuning is necessary for using FreeBSD with less than 8 GB of RAM. I tried giving 1 GB to bhyve FreeBSD guests and they seem to be...

I have an intel skylake i5 3.3GHz processor and it used to work with drm-devel-kmod and xorg-minimal. I have the default generic kernel but I have found that the packages do not work unless build them myself. I have built xorg-minimal and drm-kmod but whenever I try startx it fails to load...

There's a comment in the BUGS section of the OpenBSD cpu(4) man page: I'm wondering, whether * It's an Intel-specific bug, and both FreeBSD and OpenBSD have the same problem. OR * It's an OpenBSD specific problem, thus it doesn't apply to FreeBSD.

I understand this question has been asked before on the forums over the years but I would like to request an update for 2021, and given 13.0-RELEASE is right around the corner, perhaps some things have been added that I am not yet aware of. I'm running a ThinkPad T400 with an Intel Mobile 4...

hi everyone. laptop: Xiaomi RedmiBook 13 JYU4213CN i've got intel AC9462 wifi module on this laptop Hardware ID (from aida64) PCI\VEN_8086&DEV_02F0&SUBSYS_02A48086&REV_00 it's not working, i wish BG mode only (AC isn't implemented yet). FreeBSD 13.0-RC2 # cat /boot/loader.conf...

Hi, I tried to get Mate Desktop running. Once the Slim login screen is displayed and after having entered the username ( the user, not root) and password ,I received the following error message: “failed to execute login command” Initially, I didn’t add the xinitrc file with the line “exec...

On a FreeBSD 12.1 install (powerd enabled and running), the CPU fan speed is at 100% even though top is indicating the system is 100% idle. If I do sysctl -a | grep cpu, I see the CPU frequency is the lowest (800MHz). As for the cx_usage, I see 100% 0% 0% on both cores. The CPU heat sink...

Reports: Intel chips have new security flaws

Hi all, I have setup a fresh installation of GhostBSD 20.04.1 in a Toshiba Satellite L50-C. (Try first FreeBSD 12.1 but graphic card works better on GhostBSD ;) ) When the laptop was working on Linux Mint 19.3, it had an average speed (using wlan0) of 50-60 Mbit/s download and 20-30 Mbit/s...

Hello, I'm planning to get an Intel NUC10i5FNK (https://www.intel.com/content/www/us/en/products/boards-kits/nuc/kits/nuc10i5fnk.html). But I was worried about this new hardware (especially CPU / GPU) supported by FreeBSD 12.1-RELEASE ? CPU : Intel® Core™ i5-10210U Processor. Intel® UHD...