bluetooth

Logitech M337 couldn't connect and use in FB 13, I try may time and get a way to solve it. I hope it wouls help someone else. 1. Make sure mouse bd_addr IS *NOT* in the /var/db/bthidd.hids: the bd_addr of the mouse from bthidd.hids file 2. Restart bthidd deamon: service bthidd restart

I am looking for a Bluetooth dongle that's supported by FreeBSD. Its intended use is primarily to passively receive Bluetooth (BLE) broadcast advertisements transmitted by sensors. So, the candidate dongle should have good reception sensitivity. I think that an external antenna should be a big...

# service hcsecd onestart hcsecd does not exist in /etc/rc.d or the local startup directories (/usr/local/etc/rc.d), or is not executable # service bluetooth start ubt0 bluetooth does not exist in /etc/rc.d or the local startup directories (/usr/local/etc/rc.d), or is not executable This is...

Hi! I just can't make a USB BT dongle work. The output of "usbconfig -d ugen1.3 dump_device_desc" is following: ugen1.3: <Realtek Bluetooth Radio> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (500mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0110 bDeviceClass =...

Important notes: 1) Tested and confirmed to work on FreeBSD 13.0-RELEASE. 2) Obviously you need to first confirm whether FreeBSD supports the built-in Bluetooth of your laptop/computer. 3) For this guide, we will focus on Intel Bluetooth as that's my case in particular. Hence the use of...

Hello : I am trying to configure a bluetooth gamepad on FreeBSD 13.0, specifically an 8Bitdo SF30, basically a clone of the classic SNES controller. I have not found any information regarding this gamepad in this forum. I have configured , hcsecd and bthidd successfully, actually the...

Hello everyone, I am fairly new to FreeBSD and I use it successfully as my OS of choice for the small VPS project I have. Since I want to get away from Windows in my home in the near future, I am currently testing the viability of FreeBSD as my Desktop OS as well. At the moment I have it on my...

I would like to connect a DualShock 4 (and PS5 controller later on) with FreeBSD and my integrated (USB) Bluetooth 2.1 or 4.0 chip. With the DualShock 4 connected via USB, controllermap successfully detects both the controller and every single controller button / analog stick. Now I used...

I managed to run my Chinese BT amp with FreeBSD. I didn't find how to control the audio level. I use the following command to establish a connection with the BT: virtual_oss -B -C 2 -c 2 -r 48000 -b 16 -s 768 -R /dev/null -P /dev/bluetooth/Xpecial_Audio -d dsp /dev/sndstat isn't changed with a...

Hi, I have added support for the 7260 bluetooth card in iwmbtfw. This means that firmware downloading will now work on this card. Unfortunately I've found bluetooth (called netgraph in FBSD) support quite unreliable so far; I can hear a bit of audio coming out of my speakers but then the...

Hello, The configuration of my bluetooth speaker is recognized. I don't understand the error message: hw.snd.basename_clone: 1 -> 0 backend_bt: PSM = 0x19 backend_bt: Could not connect to HC: 5 I have the same configuration on another machine and it works with the same speaker. Both machines...

Good morning! I'm trying to make a Logitech X50 Mobile Wireless Speaker work with Bluetooth which Freebsd recognizes using a NOGA Bluetooth Dongle: ugen0.4: <Bluetooth v2.0 Bluetooth V2.0 Dongle> at usbus0 ubt0: at uhub0, port 3, addr 6 ubt0: detached Then to find out if it recognizes the...

Hi, I am using GhostBSD which as you know is based of FreeBSD. Like this forum the GhostBSD forum too is very friendly. They solved almost all of my issues. The only remaining problem is about bluetooth. I use my bluetooth headphone all the time. Under Linux my usb bluetooth dongle worked out of...

Dear wizzards, I have time until saturday to get the Bluetooth on my ThinkPad T450s up & running. It is not an external USB dongle, but internal inside the laptop; I strongly guess it's bundled within the WLAN card. I found some message about ubt0 in /var/run/dmesg.boot, so I loaded ng_ubt &...

Here’s just a small recommendation if you want to connect Bluetooth audio devices to a FreeBSD machine, such as wireless speakers or headphones. Unfortunately, FreeBSD’s support for Bluetooth audio devices is rather weak. Some devices work via the virtual_oss port, but many don’t work. It also...

Someone asked, and I'll post this here... I've never gotten it to work. I've only gotten remote devices (as in apart from the dongle) to show up, but they didn't show up as Bluetooth devices. I don't remember the output status of my Bluetooth dongle (it was either version 3 or 4). Avoid...

Looking at this: Intel AX200/AX201 I am under the impression I cannot use this card with my system (see pic): Or is there a way and I don't see it? I got this for Christmas and I love the Bluetooth 5.1 this baby has. I really want to put it to work (currently using a thumb-sized network adapter...

What I want to achieve: On 12.2-RELEASE I would like to connect wireless earbuds, Enacfire E19, with Thinkpad X250. What I am stuck with: I am not sure how to enable Bluetooth on Thinkpad X250 and to connect the earbuds with the laptop. ---- Details: -...

Hi: I have recently installed freeBSD on my laptop and I am trying to send and receive files from the PC to the laptop; on the PC I have installed LinuxMInt. I have no problem sending files from the laptop to the PC, but when I try to do the reverse the PC says "Unable to find service record"...

Hello, I would like to post my problem with FreeBSD bluetooth my USB bluetooth dongle is recognized under FreeBSD but when I use this command it does not work. No ok with this command: sudo bash -c "bthidcontrol -a 58: b3: fc: e7: 3c: fa query >> /etc/bluetooth/bthidd.conf" Could not perform...