Looking for proper cable for Graceful / Safe Shutdown of server

[cracauer@]

The answer looks good and internally consistent. But how do you verify that it didn't hallucinate it?

 

[Phishfry]

I would drop kick Claude right in its memory while it was tripping balls.

 

[lgrant]

It appears that from the computer's end, it looks like a standard RS-232 COM port. (At least as standard as RS-232 can be.) So I would look into how people use RJ11 connectors for RS-232. A Google search like this:

Google Search

brings up several pinout diagrams. That might be a good place to start.

 

[bakul]

Recently trying to using Claude 3.7 AI to check its ability to solving technicals issues like this receive. May be some of You interested about the results.

Did you know that Claude means lame or crippled? ;-)

i recommend the following video for people enamored of AI. It is a great tool in the hands of the competent but....

View: https://www.youtube.com/watch?v=EUrOxh_0leE

 

[lgrant]

It appears that from the computer's end, it looks like a standard RS-232 COM port. (At least as standard as RS-232 can be.) So I would look into how people use RJ11 connectors for RS-232. A Google search like this:

Google Search

brings up several pinout diagrams. That might be a good place to start.

IIRC, old APC UPS devices had a cable with an RJ11 on one end and DB-9 on the other, too.

 

[Sergei_Shablovsky]

So don't assume people here want to interact with a robot. I do not and will run away.

Ok now thats off my chest did it work for you? This was an unanswered post.

Thank You. Clearly understanding Your point.

But more and more Claude become really helper, mostly in programming (but only in simple tasks, not able to work properly with huge projects). Especially, if You know how to use it.

But for now I prefer mostly “search on specific forum, then in Google” and only after then “asking on specific forum”, and last - this “pesky Claude”.