Hi, I am running FreeBSD 13.2-PRERELEASE , I notice that the wifi cad is detected (motherboard ROG CROSSHAIR VIII HERO (WI-FI)), here the output of pciconf:
From dmesg:
But when I try to create an wlan0 I get this error
Just in case the output of kldsta:
Any ideas?
Code:
iwlwifi0@pci0:6:0:0: class=0x028000 rev=0x1a hdr=0x00 vendor=0x8086 device=0x2723 subvendor=0x8086 subdevice=0x0084
vendor = 'Intel Corporation'
device = 'Wi-Fi 6 AX200'
class = network
From dmesg:
Code:
iwlwifi0: <iwlwifi> mem 0xfc700000-0xfc703fff irq 30 at device 0.0 on pci6
iwlwifi0: successfully loaded firmware image 'iwlwifi-cc-a0-73.ucode'
iwlwifi0: api flags index 2 larger than supported by driver
iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
iwlwifi0: loaded firmware version 73.35c0a2c6.0 cc-a0-73.ucode op_mode iwlmvm
iwlwifi0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340
iwlwifi0: Detected RF HR B3, rfid=0x10a100
iwlwifi0: base HW address: 50:e0:85:87:b5:18
But when I try to create an wlan0 I get this error
SIOCIFCREATE2 (wlan0)
Code:
# ifconfig wlan0 create wlandev iwlwifi0
ifconfig: SIOCIFCREATE2 (wlan0): Bad address
Just in case the output of kldsta:
Code:
# kldstat
Id Refs Address Size Name
1 58 0xffffffff80200000 2140e90 kernel
2 1 0xffffffff82341000 5d14e8 zfs.ko
3 1 0xffffffff82913000 100ad8 if_re.ko
4 1 0xffffffff82a14000 40f8 nmdm.ko
5 1 0xffffffff82a19000 582a80 vmm.ko
6 1 0xffffffff83120000 3530 fdescfs.ko
7 1 0xffffffff83124000 3378 acpi_wmi.ko
8 1 0xffffffff83128000 880c8 if_iwlwifi.ko
9 1 0xffffffff831b1000 3218 intpm.ko
10 1 0xffffffff831b5000 2180 smbus.ko
11 1 0xffffffff831b8000 3340 uhid.ko
12 1 0xffffffff831bc000 3380 usbhid.ko
13 1 0xffffffff831c0000 31f8 hidbus.ko
14 1 0xffffffff831c4000 3320 wmt.ko
15 1 0xffffffff831c8000 7638 if_bridge.ko
16 1 0xffffffff831d0000 60d8 bridgestp.ko
17 1 0xffffffff831d7000 4700 nullfs.ko
Any ideas?
Last edited by a moderator: