This is one of the few pieces of hardware that I still couldn't get to work.
According to an internet search this is the Bluetooth card of my laptop (Dell E6530). Following the handbook, I have the ng_ubt loaded at startup. Unfortunately, this is where I get stuck. I cannot "Plug in the USB dongle", obviously.
I am running
Thank you for your help.
Code:
# usbconfig -u 1 -a 3 dump_device_desc
ugen1.3: <BCM20702A0 Broadcom Corp> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (0mA)
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0200
bDeviceClass = 0x00ff
bDeviceSubClass = 0x0001
bDeviceProtocol = 0x0001
bMaxPacketSize0 = 0x0040
idVendor = 0x413c
idProduct = 0x8197
bcdDevice = 0x0112
iManufacturer = 0x0001 <Broadcom Corp>
iProduct = 0x0002 <BCM20702A0>
iSerialNumber = 0x0003 <2016D8915452>
bNumConfigurations = 0x0001According to an internet search this is the Bluetooth card of my laptop (Dell E6530). Following the handbook, I have the ng_ubt loaded at startup. Unfortunately, this is where I get stuck. I cannot "Plug in the USB dongle", obviously.
dmesg | grep ubt returns nothing, and the only somewhat related dmesg lines are:
Code:
ugen1.3: <Broadcom Corp> at usbus1
...
iwn0: iwn_setregdomain: invalid channel 36 freq 5180/0x40340
WARNING: attempt to domain_add(bluetooth) after domainfinalize()I am running
Code:
FreeBSD orthanc 9.2-RELEASE FreeBSD 9.2-RELEASE #0 r255898: Thu Sep 26 22:50:31 UTC 2013 root@bake.isc.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64Thank you for your help.