bhyve sr-iov: ixv0 connection after loading vm with a passthrough device

B

benoitc

I am trying to use SR-IOV on my machine with an IX card, but each time i start the vm on the passthrough devices the connections wihci is started on the virtuall function dedicated for the host, the connection hangs and it is not possible to setup the connection back until I reboot. Do anyone know what i'm missing in my configuration? I don't see any useful logs in dmesg :(
I've the following configuration to setiuup sr-iov:

Code: 
more /etc/iov-ix0.conf
PF {
        device: "ix0";
        num_vfs: 4;
}

DEFAULT {
        passthrough: true;
        allow-set-mac: true
        allow-promisc: true;
}

VF-0 {
        passthrough: false;
        mac-addr: "36:6b:d2:f9:a9:08";
}

and in loader.conf:

Code: 
ifconfig_ixv0="up"

cloned_interfaces="lo1 bgp services"

vlans_ixv0="bgp services"

create_args_bgp="vlan 1000"
create_args_services="vlan 2000"

ifconfig_bgp_ipv6="inet6 XXX/64"

vms starts and the device seeps to be setup:

Code: 
ixv0@pci0:8:0:128:    class=0x020000 rev=0x01 hdr=0x00 vendor=0x8086 device=0x10ed subvendor=0x103c subdevice=0x17d3
    vendor     = 'Intel Corporation'
    device     = '82599 Ethernet Controller Virtual Function'
    class      = network
    subclass   = ethernet
    cap 11[70] = MSI-X supports 3 messages, enabled
                 Table in map 0x1c[0x0], PBA in map 0x1c[0x2000]
    cap 10[a0] = PCI-Express 0 endpoint max data 128(128)
                 max read 128
    ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
    ecap 000e[150] = ARI 1
ppt0@pci0:8:0:130:    class=0x020000 rev=0x01 hdr=0x00 vendor=0x8086 device=0x10ed subvendor=0x103c subdevice=0x17d3
    vendor     = 'Intel Corporation'
    device     = '82599 Ethernet Controller Virtual Function'
    class      = network
    subclass   = ethernet
    cap 11[70] = MSI-X supports 3 messages
                 Table in map 0x1c[0x0], PBA in map 0x1c[0x2000]
    cap 10[a0] = PCI-Express 0 endpoint max data 128(128)
                 max read 128
    ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
    ecap 000e[150] = ARI 1
ppt1@pci0:8:0:132:    class=0x020000 rev=0x01 hdr=0x00 vendor=0x8086 device=0x10ed subvendor=0x103c subdevice=0x17d3
    vendor     = 'Intel Corporation'
    device     = '82599 Ethernet Controller Virtual Function'
    class      = network
    subclass   = ethernet
    cap 11[70] = MSI-X supports 3 messages
                 Table in map 0x1c[0x0], PBA in map 0x1c[0x2000]
    cap 10[a0] = PCI-Express 0 endpoint max data 128(128)
                 max read 128
    ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
    ecap 000e[150] = ARI 1
ppt2@pci0:8:0:134:    class=0x020000 rev=0x01 hdr=0x00 vendor=0x8086 device=0x10ed subvendor=0x103c subdevice=0x17d3
    vendor     = 'Intel Corporation'
    device     = '82599 Ethernet Controller Virtual Function'
    class      = network
    subclass   = ethernet
    cap 11[70] = MSI-X supports 3 messages
                 Table in map 0x1c[0x0], PBA in map 0x1c[0x2000]
    cap 10[a0] = PCI-Express 0 endpoint max data 128(128)
                 max read 128
    ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
    ecap 000e[150] = ARI 1


VM is started using vm-bhyve:

Code: 
loader="uefi-csm"
cpu=1
memory=2G
passthru0=8/0/130=5:0
disk0_type="virtio-blk"
disk0_name="disk0.img"
uuid="ac3dafab-bedb-11ec-b24d-1402ec690a80"
 
SirDice said:
Not sure if it's going to matter but add some quotes here; passthru0="8/0/130=5:0"
Click to expand...
I made this change, but that doesn't change the result unfortunately. When trying to restart netif I am getting this message: "Mailbox API negotiation failed in if_init" .I am using the intel-kmod port, I will try without.
 
You must log in or register to reply here.
Back
Top