Solved pid xxxx (asterisk), uid 931: exited on signal 11

[wmoreno3]

I have had problems with asterisk:
The problem arises with asterisk's update.
/usr/local/etc/rc.d/asterisk start
dmesg -a

pid xxxx (asterisk), uid 931: exited on signal 11

anyone had an idea ?
My system:

FreeBSD mydomain 10.1-RELEASE-p6 FreeBSD 10.1-RELEASE-p6 #0: Tue Feb 24 19:00:21 UTC 2015     root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC  amd64

pkg info | grep asterisk

asterisk13-13.2.0              Open Source PBX and telephony toolkit

 

[junovitch@]

The issue appears to be from the recent OpenSSL 1.0.2 update. I would suggest following the mailing list post below and requesting further info as it's discussed on the mailing list.
https://lists.freebsd.org/pipermail/freebsd-ports/2015-March/098500.html

 

[junovitch@]

From the looks of it the options that were an issue have been disabled in SVN r382011: https://svnweb.freebsd.org/ports?view=revision&revision=382011

Update your ports and try again. Take a look at /usr/ports/UPDATING and see if the options disabled are ones you need as it looks like there are some steps to follow if you need to re-enable them.

 

[wmoreno3]

From the looks of it the options that were an issue have been disabled in SVN r382011: https://svnweb.freebsd.org/ports?view=revision&revision=382011

Update your ports and try again. Take a look at /usr/ports/UPDATING and see if the options disabled are ones you need as it looks like there are some steps to follow if you need to re-enable them.

Thanks - but negative:

root@server:/usr/ports/net/asterisk13 # /usr/local/etc/rc.d/asterisk start
Starting asterisk.
root@server:/usr/ports/net/asterisk13 # /usr/local/etc/rc.d/asterisk status
asterisk is not running.

 

[junovitch@]

There's a bigger discussion on FreeBSD-stable. See "Problems with OpenSSL 1.0.2 update" on https://lists.freebsd.org/pipermail/freebsd-stable/2015-March/thread.html.

The one comment, https://lists.freebsd.org/pipermail/freebsd-stable/2015-March/082057.html, seems to indicate it was regarding a certain option. That's what was in the UPDATING but if you already built it the previous options would have been used. If you do a make config and remove that option does that help?

 

[wmoreno3]

SOLVED:
This solved the issue...
"johan 2015-04-10 20:30:59 UTC Comment 43"
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=198788#c43
"Did not dig deeper in asterisk's deps, but instead tried to build openssl port without ASM option. This solved the asterisk problem immediately."