Hello,
I'm using Linux since kernel 1.2.13 but I think it has become a big mess in recent years. Also it's everywhere and BSD in underrated,
sooo I am coming back to the little daemon, I could manage to set up my T480 with nice settings
but I don't get much power time on the battery.
rc.conf
loader.conf
How can I improve this little beast
Thanks for your help
I'm using Linux since kernel 1.2.13 but I think it has become a big mess in recent years. Also it's everywhere and BSD in underrated,
sooo I am coming back to the little daemon, I could manage to set up my T480 with nice settings
but I don't get much power time on the battery.
rc.conf
Code:
hostname="bsd"
ifconfig_em0="DHCP"
ifconfig_em0_ipv6="inet6 accept_rtadv"
sshd_enable="YES"
moused_enable="YES"
powerd_enable="YES"
# Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable
dumpdev="AUTO"
zfs_enable="YES"
# Kernel functions flags
kld_list="i915kms cpuctl fusefs coretemp acpi_ibm acpi_video acpi_dock cuse linux linux64 linprocfs linsysfs fdescfs"
powerdxx_enable="YES"
powerdxx_flags="-n 0.5 -a 0.3 -b 0.6 -m 400 -M 1801"
performance_cx_lowest="Cmax"
economy_cx_lowest="Cmax"
dbus_enable="YES"
hald_enable="YES"
polkitd_enable="YES"
avahi_daemon_enable="YES"
avahi_dnsconfd_enable="YES"
slim_enable="YES"
webcamd_enable="YES"
webcamd_0_flags="-d ugen0.2"
# Networking; use ethernet if available, otherwise use WiFi
# https://www.freebsd.org/doc/handbook/network-aggregation.html
ifconfig_wlan0="DHCP WPA country CA powersave"
wlans_iwm0="wlan0"
# Don't pause during boot for DHCP
background_dhclient="YES"
# Network flags
wlans_iwm0="wlan0"
# Don't pause during boot for DHCP
background_dhclient="YES"
# Network flags
#cloned_interfaces="lagg0"
#ifconfig_lagg0="up laggproto failover laggport em0 laggport wlan0 DHCP"
ntpd_enable="YES"
ntpd_sync_on_start="YES"loader.conf
Code:
kern.geom.label.disk_ident.enable="0"
kern.geom.label.gptid.enable="0"
cryptodev_load="YES"
zfs_load="YES"
# disable intel pstate 0
hint.hwpstate_intel.0.disabled=1
cryptodev_load="YES"
zfs_load="YES"
pf_load="YES"
cc_htcp_load="YES"
# gpu configuration
hw.i915kms.modeset=1
hw.i915kms.enable_dc=2
hw.i915kms.enable_fbc=1
hw.i915kms.fastboot=1
# tuning processes
kern.hz="1200"
kern.ipc.shmseg="1024"
kern.ipc.shmmni="1024"
kern.ipc.shmall="256000"
kern.ipc.shmmax="1000000000"
kern.ipc.shm_allow_removed=1
kern.ipc.shm_use_phys=1
kern.maxproc="100000"
kern.maxfiles="2000000"
kern.maxusers="512"
cuse_load="YES"
if_iwm_load="YES"
iwm8265fw_load="YES"
acpi_ibm_load="YES"
fusefs_load="YES"
# Place devices in low power state when suitable driver not found
# (man 4 pci)
hw.pci.do_power_nodriver=3
hw.psm.synaptics_support="1"How can I improve this little beast
Thanks for your help