By https://reviews.freebsd.org/D43555 , FreeBSD will install firmware while you are installing system. But it not work by my network.
So I install gpu-firmware-intel-kmod-alderlake, gpu-firmware-intel-kmod-tigerlake, wifi-firmware-rtw89-kmod-rtw8852b by Ports.
You can try fwget :
But the The warning message always appears in dmesg. see also https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=283476 。All the firmware installed by ports or pkg will be installed in /boot/modules, not /boot/firmware/. The /boot/firmware/ is always empty. Is there a way to suppress these prompts?
So I install gpu-firmware-intel-kmod-alderlake, gpu-firmware-intel-kmod-tigerlake, wifi-firmware-rtw89-kmod-rtw8852b by Ports.
You can try fwget :
Code:
root@ykla:~ # fwget
Needed firmware packages: 'gpu-firmware-intel-kmod-alderlake gpu-firmware-intel-kmod-tigerlake wifi-firmware-rtw89-kmod-rtw8852b'
The most recent versions of packages are already installedBut the The warning message always appears in dmesg. see also https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=283476 。All the firmware installed by ports or pkg will be installed in /boot/modules, not /boot/firmware/. The /boot/firmware/ is always empty. Is there a way to suppress these prompts?
Code:
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.2-RELEASE releng/14.2-n269506-c8918d6c7412 GENERIC amd64
FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67)
VT(efifb): resolution 1024x600
CPU: Intel(R) N100 (806.40-MHz K8-class CPU)
Origin="GenuineIntel" Id=0xb06e0 Family=0x6 Model=0xbe Stepping=0
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA>
Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B>
Structured Extended Features3=0xfc184410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
IA32_ARCH_CAPS=0x180fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16351019008 (15593 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
WARNING: L3 data cache covers more APIC IDs than a package (7 > 3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 2 3 1
random: entropy device external interface
kbd0 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0x75ca7000-0x75ca701e
smbios0: Version: 3.6, BCD Revision: 3.6
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
Firmware Error (ACPI): Could not resolve symbol [\134_SB.PC00.TXHC.RHUB.SS01], AE_NOT_FOUND (20221020/dswload2-315)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372)
Firmware Error (ACPI): Could not resolve symbol [\134_SB.PC00.TXHC.RHUB.SS02], AE_NOT_FOUND (20221020/dswload2-315)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372)
acpi0: Power Button (fixed)
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 19200000 Hz quality 950
Event timer "HPET" frequency 19200000 Hz quality 550
Event timer "HPET1" frequency 19200000 Hz quality 440
Event timer "HPET2" frequency 19200000 Hz quality 440
Event timer "HPET3" frequency 19200000 Hz quality 440
Event timer "HPET4" frequency 19200000 Hz quality 440
atrtc1: <AT realtime clock> on acpi0
atrtc1: Warning: Couldn't map I/O.
atrtc1: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6001120000-0x600112ffff at device 13.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms, UART> at device 18.0 (no driver attached)
xhci1: <XHCI (generic) USB 3.0 controller> mem 0x6001100000-0x600110ffff at device 20.0 on pci0
xhci1: 32 bytes context size, 64-bit DMA
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pci0: <memory, RAM> at device 20.2 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
sdhci_pci0: <Generic SD HCI> mem 0x6001149000-0x6001149fff at device 26.0 on pci0
sdhci_pci0: 1 slot(s) allocated
mmc0: <MMC/SD bus> on sdhci_pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <network> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 28.6 on pci0
pci2: <ACPI PCI bus> on pcib2
igc0: <Intel(R) Ethernet Controller I226-V> mem 0x80500000-0x805fffff,0x80600000-0x80603fff at device 0.0 on pci2
igc0: EEPROM V2.17-0 eTrack 0x80000303
igc0: Using 1024 TX descriptors and 1024 RX descriptors
igc0: Using 4 RX queues 4 TX queues
igc0: Using MSI-X interrupts with 5 vectors
igc0: Ethernet address: 10:02:b5:86:0e:f9
igc0: netmap queues/slots: TX 4/1024, RX 4/1024
pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci0
pci3: <ACPI PCI bus> on pcib3
nvme0: <Generic NVMe Device> mem 0x80700000-0x80703fff at device 0.0 on pci3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
hdac0: <Intel Alder Lake-N HDA Controller> mem 0x6001140000-0x6001143fff,0x6001000000-0x60010fffff at device 31.3 on pci0
pci0: <serial bus> at device 31.5 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
atrtc0: Can't map interrupt.
atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15.
hwpstate_intel0: <Intel Speed Shift> on cpu0
hwpstate_intel1: <Intel Speed Shift> on cpu1
hwpstate_intel2: <Intel Speed Shift> on cpu2
hwpstate_intel3: <Intel Speed Shift> on cpu3
Timecounter "TSC" frequency 806401101 Hz quality 1000
Timecounters tick every 1.000 msec
ugen0.1: <Intel XHCI root HUB> at usbus0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
uhub0 on usbus0
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel XHCI root HUB> at usbus1
uhub1 on usbus1
uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
mmcsd0: 125GB <MMCHC Y2P128 0.0 SN F034273C MFG 04/2023 by 155 0x0000> at mmc0 200.0MHz/8bit/8192-block
mmcsd0boot0: 4MB partition 1 at mmcsd0
mmcsd0boot1: 4MB partition 2 at mmcsd0
mmcsd0rpmb: 17MB partition 3 at mmcsd0
nvme0: Allocated 16MB host memory buffer
hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC269 (Right Analog)> at nid 21 and 24 on hdaa0
nda0 at nvme0 bus 0 scbus0 target 0 lun 1
nda0: <Fanxiang S530Q 500GB SN14243 FX240960178>
nda0: Serial Number FX240960178
nda0: nvme version 1.4
nda0: 476940MB (976773168 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
uhub0: 2 ports with 2 removable, self powered
uhub1: 16 ports with 16 removable, self powered
Root mount waiting for: usbus1
ugen1.2: <Realtek Bluetooth Radio> at usbus1
[drm] Got Intel graphics stolen memory base 0x7c800000, size 0x3c00000
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
adlp_dmc_ver2_16.bin: could not load binary firmware /boot/firmware/adlp_dmc_ver2_16.bin either
i915/adlp_dmc_ver2_16.bin: could not load binary firmware /boot/firmware/i915/adlp_dmc_ver2_16.bin either
i915_adlp_dmc_ver2_16.bin: could not load binary firmware /boot/firmware/i915_adlp_dmc_ver2_16.bin either
i915_adlp_dmc_ver2_16_bin: could not load binary firmware /boot/firmware/i915_adlp_dmc_ver2_16_bin either
i915_adlp_dmc_ver2_16_bin: could not load binary firmware /boot/firmware/i915_adlp_dmc_ver2_16_bin either
drmn0: could not load firmware image 'i915/adlp_dmc_ver2_16.bin'
drmn0: [drm] Failed to load DMC firmware i915/adlp_dmc_ver2_16.bin. Disabling runtime power management.
drmn0: [drm] Run pkg install gpu-firmware-kmod to install it
lkpi_iic0: <LinuxKPI I2C> on drmn0
iicbus0: <Philips I2C bus> on lkpi_iic0
iic0: <I2C generic I/O> on iicbus0
lkpi_iic1: <LinuxKPI I2C> on drmn0
iicbus1: <Philips I2C bus> on lkpi_iic1
iic1: <I2C generic I/O> on iicbus1
lkpi_iic2: <LinuxKPI I2C> on drmn0
iicbus2: <Philips I2C bus> on lkpi_iic2
iic2: <I2C generic I/O> on iicbus2
lkpi_iic3: <LinuxKPI I2C> on drmn0
iicbus3: <Philips I2C bus> on lkpi_iic3
iic3: <I2C generic I/O> on iicbus3
lkpi_iic4: <LinuxKPI I2C> on drmn0
iicbus4: <Philips I2C bus> on lkpi_iic4
iic4: <I2C generic I/O> on iicbus4
lkpi_iic5: <LinuxKPI I2C> on drmn0
iicbus5: <Philips I2C bus> on lkpi_iic5
iic5: <I2C generic I/O> on iicbus5
lkpi_iic6: <LinuxKPI I2C> on drmn0
iicbus6: <Philips I2C bus> on lkpi_iic6
iic6: <I2C generic I/O> on iicbus6
lkpi_iic7: <LinuxKPI I2C> on drmn0
iicbus7: <Philips I2C bus> on lkpi_iic7
iic7: <I2C generic I/O> on iicbus7
lkpi_iic8: <LinuxKPI I2C> on drmn0
iicbus8: <Philips I2C bus> on lkpi_iic8
iic8: <I2C generic I/O> on iicbus8
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
[drm] Initialized i915 1.6.0 20201103 for drmn0 on minor 0
VT: Replacing driver "efifb" with new "drmfb".
start FB_INFO:
height=600 width=1024 depth=32
pbase=0x4000000000 vbase=0xfffffe00f9600000
name=drmn0 id=i915drmfb flags=0x0 stride=4096
end FB_INFO
ichsmb0: <Intel Alder Lake SMBus controller> port 0xefa0-0xefbf mem 0x6001148000-0x60011480ff at device 31.4 on pci0
smbus0: <System Management Bus> on ichsmb0
rtw890: <rtw89_8852be> port 0x3000-0x30ff mem 0x80800000-0x808fffff at device 0.0 on pci1
rtw8852b_fw-1.bin: could not load binary firmware /boot/firmware/rtw8852b_fw-1.bin either
rtw89/rtw8852b_fw-1.bin: could not load binary firmware /boot/firmware/rtw89/rtw8852b_fw-1.bin either
rtw89_rtw8852b_fw-1.bin: could not load binary firmware /boot/firmware/rtw89_rtw8852b_fw-1.bin either
rtw89_rtw8852b_fw-1_bin: could not load binary firmware /boot/firmware/rtw89_rtw8852b_fw-1_bin either
rtw890: successfully loaded firmware image 'rtw89/rtw8852b_fw-1.bin'
rtw890: loaded firmware rtw89/rtw8852b_fw-1.bin
rtw890: Firmware version 0.29.29.5 (da87cccd), cmd version 0, type 5
rtw890: Firmware version 0.29.29.5 (da87cccd), cmd version 0, type 3
rtw890: chip rfe_type is 5
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361)
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: cannot find EC device
acpi_wmi1: Embedded MOF found
ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361)
igc0: link state changed to UP
lo0: link state changed to UP
igc0: link state changed to DOWN
ubt0 on uhub1
ubt0: <Realtek Bluetooth Radio, class 224/1, rev 1.00/0.00, addr 1> on usbus1
igc0: link state changed to UP
Security policy loaded: MAC/ntpd (mac_ntpd)