Hello -
Warning: I'm new to FreeBSD. I've looked at a lot of posts and cannot figure this out. I have done some debugging with the code to realize that it doesn't seem to pass the function call
in /usr/src/netgraph/bluetooth/drivers/ubt/ng_ubt.c. But to further debug, I need some help understanding how to get the object files I complied successfully in /usr/src/sys/modules/usb/usb/ to be linked when compiling this file. But I believe that is a separate post.
Anyway, I'm trying to debug why my Bluetooth dongle isn't picked up by the
My /boot/loader.conf file looks like this:
And my /etc/rc.conf looks like this:
If I plug-in the device, and do a
It is my assumption that this hardware is supported by reading this comment in /usr/src/netgraph/bluetooth/drivers/ubt/ng_ubt.c
Thanks!
Warning: I'm new to FreeBSD. I've looked at a lot of posts and cannot figure this out. I have done some debugging with the code to realize that it doesn't seem to pass the function call
Code:
usbd_lookup_id_by_uaaAnyway, I'm trying to debug why my Bluetooth dongle isn't picked up by the
ng_ubt driver. If I run usbconfig is shows it's being picked up by the ugen driver:
Code:
$ sudo usbconfig
ugen2.1: <0x1022 XHCI root HUB> at usbus2, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA)
ugen0.1: <0x1022 XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA)
ugen1.1: <0x1b21 XHCI root HUB> at usbus1, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA)
ugen2.2: <Razer Razer BlackWidow Ultimate 2016> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (500mA)
ugen0.2: <Logitech USB Receiver> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (98mA)
ugen0.3: <Broadcom Corp BCM20702A0> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (0mA)
ugen0.4: <Generic Mass Storage Device> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (100mA)My /boot/loader.conf file looks like this:
Code:
kern.vty=vt
cuse4bsd_load="YES"
ng_ubt_load="YES"And my /etc/rc.conf looks like this:
Code:
hostname=""
sshd_enable="YES"
# Set dumpdev to "AUTO" to enable crash dumps, "NO" to disable
dumpdev="AUTO"
ifconfig_igb0="DHCP"
dbus_enable="YES"
hald_enable="YES"
#slim_enable="YES"
linux_enable="YES"
nvidia_load="YES"
moused_enable="YES"
webcamd_enable="YES"
kld_list="nvidia nvidia-modeset"
nvidia_name="nvidia"
nvidia_modeset_name="nvidia-modeset"
gnome_enable="YES"If I plug-in the device, and do a
dmesg, this is what I see:
Code:
ugen0.3: <Broadcom Corp BCM20702A0> at usbus0It is my assumption that this hardware is supported by reading this comment in /usr/src/netgraph/bluetooth/drivers/ubt/ng_ubt.c
Code:
425 /* List of supported bluetooth devices */
426 static const STRUCT_USB_HOST_ID ubt_devs[] =
427 {
428 /* Generic Bluetooth class devices */
429 { USB_IFACE_CLASS(UDCLASS_WIRELESS),
430 USB_IFACE_SUBCLASS(UDSUBCLASS_RF),
431 USB_IFACE_PROTOCOL(UDPROTO_BLUETOOTH) },
432
433 /* AVM USB Bluetooth-Adapter BlueFritz! v2.0 */
434 { USB_VPI(USB_VENDOR_AVM, 0x3800, 0) },
435
436 /* Broadcom USB dongles, mostly BCM20702 and BCM20702A0 */
437 { USB_VENDOR(USB_VENDOR_BROADCOM),
438 USB_IFACE_CLASS(UICLASS_VENDOR),
439 USB_IFACE_SUBCLASS(UDSUBCLASS_RF),
440 USB_IFACE_PROTOCOL(UDPROTO_BLUETOOTH) },Thanks!
