vpn client

Keep in mind I set up a wireguard server and 3 ubuntu clients. we wg0.conf [Interface] PrivateKey = private.key address = 11.11.11.6/32 DNS = 8.8.8.8 [Peer] PublicKey = publicserver.key AllowedIPs = 0.0.0.0/0 Endpoint = serverip:51820 PersistentKeepalive = 15 rc.conf wireguard_enable="YES"...

Hello. I need to open a port on my Freebsd desktop. there is a VPN server on Linux, everything is configured there. when I connect to a VPN with the firewall turned off on the local host, the port is open when I comment on the line block all in the enabled PF. The port is also opening. But what...

Hi, I've created a socket which is bound to virtual interface, and receive all outgoing traffic due to default routing table rule setting. Once outgoing packet arrive, it will be encapsulated with some VPN header and sent to the remote tunnel gateway through the physical interface. I was...

I use OpenVPN to log into a corporate network with a network IP range 10.0.0.0/8. This works when at home when my LAN's network address is 192.168.0.0/24. However, in an Internet Café the LAN network IP is also 10.0.0.0/8 and when I start the VPN the routes get overwritten and all packets are...

Hello, I'm studying in a university and using FreeBSD as my daily computer operate system for months. However, I cannot connect to outside Internet via wired ethernet until now. There are two steps to set up a connection in my laboratory. First, provide the information of static ipv4 address...

Hi, I'm trying to convert the ppp config from a Linux machine to my FreeBSD's MPD5. Here is the Linux /etc/ppp/ppers/peervpn file: # written by pptpsetup pty "pptp peer.vpn.domain --nolaunchpppd" lock noauth refuse-pap refuse-eap refuse-chap nobsdcomp nodeflate name myuser remotename peervpn...

I am attempting to connect to a NordVPN ovpn file using the cli command 'sudo openvpn filname.ovpn." However, once the connection is established, the entire internet connection cuts out. No firewall is enabled. ifconfig shows the wired connection as re0. I'd provide more information, but I...

Hello, I have two servers at two different locations running FreeBSD-12.1-RELEASE, L2TP/IPSEC VPN servers with Racoon & MPD5. They both work great and allow MAC/Windows/iPhones to connect. I'm also trying to set up Server A to do a connect to Server B as an L2TP/IPSEC Client and...

I have a FreeBSD full access. I need to turn Iran Internet Filtering.My server is out of Iran. So I can turn my Internet Filtering. I installed Zebedee in my server and it good work with Linux Desktop,Both have 2.5.3 version, But Android doens't has for this version. I'm looking for a tunneling...

I'm trying to vpn from my FreeBSD laptop to a Ubiquiti EdgeRouter. An IKE connection is established by security/strongswan and an IP address is assigned to the ng0 interface created by net/mpd5. But how do I make traffic pass through this tunnel? From what I gather in other threads this should...

em0 - internet ng0 - pptp_client (mpd5) 192.168.103.181/32 em1 - internal net 1 192.168.11.1/24 vlan207 - internal net 2 192.168.103.182/24 Hi, how to make, that will work as a network bridge between ng0 and vlan207 ?

This How-To explains how to set up a Privateinternetaccess (PIA) client on FreeBSD using OpenVPN. This setup focuses on having PIA OpenVPN run from startup of your machine. PREREQUISITES I assume the following 1. you have a running FreeBSD system 2a. you have ports installed or 2b. you have the...