rpi

Hi there. So I said I am making a switch but that is not completely true but that describes it well. I have an RPI. ethernet on it used to connect to the internetses. Rpi has two usb adapters - WiFi and Ethernet. I am sharing network to this adapters, nat, pf. WiFi is a AP. That is where things...

Hello, OS: FreeBSD:13.2-Release Driver: spigen-rpi4 The issue: With 5MHz SPI clock the communication RPI<->mcp3912 is established smooth. After increasing the speed to 10MHz, data is very random/incorrect. The SPI devices supports SPI clock to 20MHz. Verification scenario is very short...

Thanks to a recent video by RoboNuggie my Raspberry Pi 400 now runs at a higher CPU clock speed and is therefore much more usable. Now I can actually start using it for reading web pages, watching online videos and generally tinker with FreeBSD. Which brings me to my question. I'd like to use...

Hi, I've been using FreeBSD 13.0 on an RPI 4 and I noticed something weird when setting up a cron job. I could not get the cron job to run, so I inspected /var/log/cron and found 2 different datetimes. As you can see below, it logs when I edit the crontab using the correct datetime of the...

More of a PSA than actual thread. Read the following links and share your thought. This matter is near dear to my heart. Also if you have specific technical suggestions please, head over the mailing list, and share your opinion by reply/email over there. Quote the TL;DR from the original email...

I have been experiencing a issue with what I think to be system messages taking over the terminal for quit some time. I just noticed though that it only seems to happen when the PI has been on and working for some time. I do not have the messages now and have to reboot to get the Pi working...

Could someone actively using Poudriere on 11.0-ALPHA3 on amd64 to build ports for their RPI using head on please confirm or deny the following: 1. ports-mgmt/poudriere-devel is required for ongoing success ? 2. Is the following link currently accurate ? https://forums.freebsd.org/threads/52994/

Hello, I am a new and proud member of the FreeBSD community. I am hosting a small website on my RPI with FreeBSD. One question is, where is the overclocking configuration for RPI? The closest answer I got is from this website...

Hello, I haven't used FreeBSD since around 2003, but I'm pretty far into reading my way through the handbook! Please excuse the poor formatting and any obvious steps I may have missed. I've installed FreeBSD-CURRENT-20151102 onto a Raspberry Pi 2B with the root FS on an external USB HDD and...

Hardware: Brand new Raspberry Pi B+ Software : FreeBSD-10.1-STABLE-arm-armv6-RPI-B-20150217-r278906.img.bz2 dd'd the uncompressed img file to an 8GB micro sdCARD, inserted into RPB+, applied power - green LED goes out within 1-2 seconds. Nothing appears to be happening. Note 1: The FreeBSD...