ifconfig

Hello darlings! Basically, i did created a JAIL, with this configuration: main { host.hostname = "main"; exec.clean; exec.start = "/bin/sh /etc/rc"; exec.stop = "/bin/sh /etc/rc.shutdown"; exec.prestart += "kldload -n ipfw_nat"; exec.prestart += "kldload -n ipsec"...

Hi. Before I execute ifconfig re0 -rxcsum -rxcsum6 -txcsum -txcsum6 -lro -tso -vlanhwtso -vlanhwfilter I had; options=602019<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,WOL_MAGIC,RXCSUM_IPV6,TXCSUM_IPV6> on my re0 interface. After it, I have; options=2019<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,WOL_MAGIC> and it...

I'm using netmap and a tap interface to manipulate network traffic with a c-program. Everything works fine when the physical interface is in promiscuous mode, but I want to avoid that. The problem is that I'm not receiving multicast frames on the physical interface because the programs...

Hello, community. Seeking help/guidance from more experienced folks. Issue: cannot create specific vlan interface. Surprisingly for me it does create all, but vlan 6 from configuration below. root@core01:/home/ # cat /etc/rc.conf | grep ifconfig ifconfig_igb0_name="wan up"...

I have a project that sometimes requires configuring a lot of vlans, but when I try to, for example, configure 100 vlans, it takes about 2 minutes, and when creating more vlans, that grows linearly, so it takes about 20 minutes for creating 1000 vlans, and over an hour for 4000 vlans. Is there a...

How to configure in /etc/rc.conf an interface with "ether random" so that the MAC address is not the same as the main interface? For example when creating a VLAN I use something like: cloned_interfaces="vlan0" create_args_vlan0="vlan 4000 vlandev em0 mtu 1400 fib 1" ifconfig_vlan0="ether...

Hi guys, I am using tinc 1.1pre for my vpn service and it happily work fine until I upgraded to 12.2 and 13.0 and I notice tinc service will hung up when I try to restart or stop the service. Upon checking I found out the tinc-down service which has ifconfig tap0 destroy was hung. I try to run...

I am seeking help here as despite reading the documentation for rc.conf I am clearly missing something. I wish vtnet0 to be disabled on boot along with ipv6 being disabled on vtnet1. I am perhaps being lead astray from the output so forgive me, I am a new user to BSD. rc.conf...

I am trying to create a network alias for a jail I want to install NextCloud in, but when I run ifconfig nxt0 create, I get the following error: ifconfig: SIOCIFCREATE2: Invalid argument I read on this forum post that there may be something wrong with my kernel modules but unfortunately there...

Hello, I'm using bhyve on 12.1-RELEASE-p6, with failover mode between ethernet and wireless interfaces enabled and configured as following: ifconfig_em0="ether 10:0b:a9:9e:76:28" wlans_iwn0="wlan0" ifconfig_wlan0="WPA" cloned_interfaces="lagg0" ifconfig_lagg0="up laggproto failover laggport em0...

I can add an interface to a group easily enough with ifconfig <interface> group <group name> However, I want this to be automatic (if possible). I can write a script and place it in /usr/local/etc/rc.d and enable that, but is there an existing way to do this? I tried editing /etc/rc.conf...

Hello, I have a simple box running FreeBSD 12. It is running some Jails, and I want it to have a dynamic network configuration. As network configuration I have this in my /etc/rc.conf: hostname="box" ifconfig_bge0="SYNCDHCP" ipv6_default_interface="bge0" ifconfig_beg0_ipv6="inet6...

Two weeks ago (end of December 2019) I installed FreeBSD from USB stick with FREEBSD-12.0-RELEASE-amd64-dvd.iso I recall only selecting ipv4 and setting the up to the static IP I wanted my freeBSD box to use. Two days ago there was bad weather and my R7000 was not plugged into UPS during a...

So I have been tried to setup a wireless connection on start up but it seems that the system does not see the wireless adapter when bringing up the interface, which is loaded later After reboot service netif restart outputs this: Stopping Network: lo0 em0. lo0...

More info: Driver works for me, but I have to have spoofed mac address. wpa_supplicant seems to ignore ifconfig wlan0 ether pl:ac:eh:0l:de:rr Currenly I have dual booting with Linux for internet

I have been testing Wireguard on FreeBSD 11.2-RELEASE and ran into a problem. The issue seems to occur when a Wireguard interface is brought online on a specific routing table with setfib 1 wg-quick up wg0 If this routing table doesn't have a default route defined, the interface and the...

I can't seem to figure out why I have to use service netif restart every single time after I rebooted my system for the ifconfig to recognize (and make visible/accessible) my "wlan0". This is the /etc/rc.conf hostname="rpi-b" ifconfig_DEFAULT="DHCP" sshd_enable="YES" sendmail_enable="NONE"...

Hello forum, I am trying to create a persistent pflog1 interface. I am successful with ifconfig but am trying to add this interface through rc.conf. After reading the manuals for both ifconfig and rc.conf and trying many combinations using ifconfig and ifconfig_, none of them will create the...

my dmesg output has a lot of wlan0: link state changed to UP wlan0: link state changed to DOWN wlan0: link state changed to UP wlan0: link state changed to DOWN wlan0: link state changed to UP However, the network appears to be working ok. I once ditched Solaris 11, believing it was...

Hi all, I have a set network aliases in /etc/rc.conf to use them in my jails. # Adding alias for wlan0 for jails ifconfig_wlan0_alias0="inet 192.168.0.100 netmask 0xffffff00 broadcast 192.168.0.255" ifconfig_wlan0_alias1="inet 192.168.0.101 netmask 0xffffff00 broadcast 192.168.0.255"...