i915kms

Hello, I just acquired a laptop, installed FreeBSD 14.1-STABLE and trying to get Xorg to work. I will be using lightDM & icewm but the issue is that the module i915kms.ko will not load due to the following error(s): Insecure kernel module load attempt rejected: /boot/kernel/lindebugfs.ko...

Hello all, This is my first time posting here, so sorry if I'm not doing this right. I've installed FreeBSD 14.0-RELEASE on an Asus Viviobook S laptop with an Intel i7-12700H CPU (uses an Alder Lake-P iGPU). So far I've run into some major issues getting the iGPU to work. Specifically, I just...

Hi there guys, experiencing issues after enable i915kms, nothing in the logs, sometimes on the screen appears a message: drm_atomic_helper_wait_for_dependencies flip_done timed out , sometimes system cant even boot at all.. Hardware: Dell latitude notebook, Intel Xeon E3-1200 7th gen, Intel...

Hi, all I have a very odd issue under FreeBSD, where my dock's DVI output is not detected, however VGA works great and S-Video is detected fine. The DVI works perfectly fine under Linux -- at least from what I saw, I used it mostly for testing. Though, it would only display under X, and it...

So I installed FreeBSD (14.0-RELEASE-p1 FreeBSD 14.0-RELEASE-p1 #1 releng/14.0-n265385-305be1f36b3e) on a used laptop I managed to acquire recently (https://www.msi.com/Laptop/Katana-GF76-11UX/Specification); I was surprised, actually, how smoothly everything went during the installation; The...

I just installed FreeBSD 14.0-RELEASE i386 some days ago on a ThinkPad x201i with i3 (M 330) cpu [integrated graphics]. I did the following as Handbook suggested: - doas pkg install xorg drm-kmod - added kld_list="i915kms" on /etc/rc.conf (also tried absolute path) - ran startx from tty as...

is that a normal CPU load for e.g. watching https://media.ccc.de/v/33c3-8089-lightning_talks_day_4#t=4663 on ungoogled-chromium? vlc uses even 150%, what to diagnose/tweak here? is there specific setup documentation? I found pkg install libva-intel-media-driver - should I activate that? How...

I'm confused. I am unable to load i915kms because drm cannot be loaded: depends on iic - not available or version mismatch. I have: drm-510-kmod-5.10.163_7 drm-kmod-20220907_1 custom kernel: a1c915cc75c1b3c66e16bb52579e2abdf122eccb (releng/13.2) This works on one box, but not another.

Hello everyone. I use a laptop that has an external display connected to it, my current setup is that for the vt console driver, the default mode is 1920x1080 so the console has a clearer resolution for the external display: /boot/loader.conf kern.vt.fb.default_mode="1920x1080" I want to be...

I have a FreeBSD disk constructed with an M.2 NGFF SSD card, in a slim enclosure such that features a set of SATA connectors and a USB 3 port. I suppose it's a sort of a portable SSD. Unfortunately, the combination of the enclosure and the storage card - by Sabrent and KingSpec, respectively -...

A fresh 13.0-RELEASE-p6 installation with graphics/drm-kmod added as a package: # dmesg | grep drm drmn0: <drmn> on vgapci0 [drm] i915.alpha_support is deprecated, use i915.force_probe=9a49 instead vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io [drm]...

In my latest attempt to upgrade 12.2 to 13.0 (on a ThinkPad X220) I'm unable to use i915kms.ko and fuse. Initially the system refuses to boot because /etc/fstab tries to mount a Linux (ext2fs) partition but after commenting it out it boots, however kldload will not load fuse. Also...

I find a consistent problem with my laptop whenever I run cheese, the screen will turn black and I'll look into the logs and get this following message: Feb 8 21:53:43 Dell kernel: error: [drm:pid12:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung Feb 8 21:53:43 Dell kernel...

Hi, I've compiled my own packages with synth, on 12.2. My procedure after boot is basically. kldload i915kms; startx X works fine, except anything OpenGL. If I do glxgears, I get this. zsh# glxgears libGL error: MESA-LOADER: failed to retrieve device information Running synchronized to the...

Hi, First of all I am new to freebsd, so I apologize in advance if I make a mistake about something. I had used freebsd before, but I only used it for about a week on the same pc. I recently installed the latest freebsd release, installed xorg and tried to install some desktop environments like...

I've installed FreeBSD 12.1-RELEASE on a Lenovo Thinkpad X1 Yoga 1st Gen with an i7-6600U CPU and an Intel HD 520 IGP. I've followed the instructions in this blog post to set up root filesystem encryption with UEFI, though I had to move /etc/loader.conf to /boot/loader.conf after installing to...

Hello all, I have just recently upgraded from 11.2 to 12.0 and my graphics settings are now borked. Previously I had the terminal resolution set to 1280x720 with this code in /boot/loader.conf It was using this: i915kms_load="YES" kern.vt.fb.default_mode="1280x720" if I load it in manually...