hostapd

Hello everyone. I ran into a problem, if someone could test it I would appreciate it: System: FreeBSD 14.0 - fresh install USB wifi dongle - Realtek RTL8192EU Modules: rtwn if_rtwn_usb I configure the wlan0 interface: ifconfig wlan0 create wlandev rtwn0 wlanmode hostap ifconfig wlan0 inet...

Observable behaviour Client WiFi devices cannot obtain their IP addresses when connecting to a FreeBSD-13.0 server acting as an access point (hostap). Client devices run Win8.1 and various Androids, but the exact client software seems irrelevant to the problem. Suspected technical reason Local...

Hostapd starts without wpa2 but doesn't start with wpa2. Have I forgotten something here? pciconf -lv for the card I'm using: rtwn0@pci0:2:0:0: class=0x028000 rev=0x01 hdr=0x00 vendor=0x10ec device=0x8176 subvendor=0x10ec subdevice=0x8211 vendor = 'Realtek Semiconductor Co., Ltd.'...

I have an AP+bridge+firewall ("router") running FreeBSD 12.2-RELEASE r366954 GENERIC amd64. It's roughly set up as follows: - igb0 connects to my ISP via DHCP. (Disabled while I debug this.) - bridge0 has dnsmasq running on it as a DHCP server and DNS server. (Only dynamic addresses at the...

Is it possible to directly access a USB device in a jail? I came across this article: https://forums.freebsd.org/threads/usb-passthrough-to-iocage-jail.73292/ It seems possible to do so from that article. If it is possible, would it make sense to create a Linux jail that has raw access to a...

I have a TP-LINK TL-WN722N and an Alfa AWUS1900 that I'd like to use for an access point. I currently use the TL-WN722N on Linux for an access point. I do not see either of these listed as supported here: https://www.freebsd.org/releases/12.1R/hardware.html Is that accurate? If so, it seems...

Does anybody has USB WLAN card to recommend for running AP (hostapd)? I tried multiple run and urtwn cards but they are not stable - don't know how to precise debug network setup but there are dropped pings to Internet, sometimes internet won't work but ssh-ing to another machine will work...

Hello All, I am attempting to find out what my issue is with my FreeBSD Router that I am attempting to build. I have set up the following tools on my OS on my router: HostAPD DNSMasq PF All of which appear to work and I can route through the AP. However; I am not getting nearly the speeds or...

Hello folks. I got this APU2C4 last week to use as all in one router, firewall, AP with FreeBSD 11. It has two mini PCIe Compex WLE200NX that uses the Atheros AR9280 chipset. I am going to be posting my configuration, hoping that someone can shed some light on what I am doing wrong. # hostapd...

Hi! I have RPi 2 with FreeBSD 11 installed. I have 2000 mA power supply. Also, I have hostapd installed and next kernel modules loaded: Id Refs Address Size Name 1 45 0xc0100000 a3f4fc kernel 2 1 0xc2e53000 28000 if_urtwn.ko 3 1 0xc2e2a000 b000 firmware.ko 4 1...