I have a Microsoft SideWinder Precision Pro (USB), and on FreeBSD 14.1 it doesn't detect for FlightGear (pkg install flightgear).
dmesg:
ugen0.7: <Microsoft Microsoft SideWinder Precision Pro (USB)> at usbus0
usbhid3 on uhub1
usbhid3: <Microsoft Microsoft SideWinder Precision Pro (USB), class...
I can't tell if it's a FreeBSD or Wayland related issue:
FlightGear 3.19 from ports
sway 1.9 from ports
FreeBSD 14.0-RELEASE, fresh install.
Flightgear/js_demo can't find the Joystick:
sudo dmesg | grep Joystick
hgame0: <Thrustmaster T.Flight Hotas X Joystick> on hidbus1
This is probably a...
I am trying to get an 8Bit Do Gamepad working with FreeBSD, I am used both hgame and xb360gp and the controller gets detected.
However, when I use it, none of the input gets detected. I don't know how to give it access to the /dev/input variables or test the input.
Can someone help me out?
Hello,
I'm developing a translation layer that reverse engineers the PS3's Dualshock 3's input to something that FreeBSD, can interpret. However, I ran into a roadblock, as the aim is to bring the native controls (gamepad ones) to FreeBSD, rather than using the keyboard and mouse translation. I...
Seems like it's wrongly detected as Nintendo Pro at a point.
ugen0.3: <Nintendo.Co.Ltd. Pro Controller> at usbus0
uhid2 numa-domain 0 on uhub2
uhid2: <Nintendo.Co.Ltd. Pro Controller, class 0/0, rev 2.00/2.00, addr 13> on usbus0
ugen0.3: <Nintendo.Co.Ltd. Pro Controller> at usbus0...
FreeBSD 13.2
Suyimazu
Steam
Airscape: The Fall of Gravity
Gravis Blackhawk with analog to USB converter
I didn't have to configure the joystick, FreeBSD and Steam decided they knew how to use it. My daughter was playing. Pretty cool.
EDIT: Chip is Intel N5095 16GB DDR4 on Sata SSD.
Recently I purchased the SN30 Pro Bluetooth gamepad from 8BitDo. Because the bluetooth support by FreeBSD is rather lackluster (and my desktop doesn't have bluetooth) I also bought the USB Wireless Adapter 2 from 8BitDo, so the gamepad could do its bluetooth stuff with the dongle and FreeBSD...
HID devices include keyboards, gamepads/joysticks, penpads/touchpads, mice... This can be for any type of HID device, from the old architecture, from x86-input, from the newer driver architecture, from Antimicro or Bluetooth. Any HID that runs on FreeBSD.
Even plans on what to do with it. Or...
Bluetooth Human Interface Device peripherals are on BTHIDD architecture, rather than UHID, IICHID or USBHID architectures. BTHIDD is based on libusb, so it doesn't have the range of hardware compatibility that USBHID has. HID-over-I2C was by Microsoft, so wasn't supported by Apple, and it isn't...
I used this term in helping a user and they had no idea of what a paddle card is.
Do you know?
I loosely consider any ISA/PCI/PCIe converter/adapter card a paddle card.
Usually they are dumb and have little electronics. Just a form-factor converter.
For instance M.2 NGFF NVMe device to PCIe bus...
Hi, I've been trying to get my wired PlayStation 4 controller to work on FreeBSD and followed the instructions in this thread. I'm not 100% sure if I needed to do anything but load the ps4dshock module because the issue was not resolved by just following these steps. However, I do know that the...
I have recently started exploring the possibilities of BSD. I am having trouble getting a eGalax touch screen to work. I have exhausted all google searches and now reaching out to the BSD community for help finding a solution. I am running a basic X-Server and have the initial touch event...
Hello FreeBSD community. Finally! )
I'm sorry for my English, I have not much practice.
First of all, what I have: laptop with RTX2060, i7, nvme, uefi.
What I know in linux: debian -> slackware -> arch.
We scared by videos on YouTube about FreeBSD. They say there are many really simple...
Enabling usbhid
usbhid gives the ability to use newer advanced hid drivers. The ability to use usbhid must be turned on from /boot/loader.conf:
hw.usb.usbhid.enable="1"
Then, load the driver through /etc/rc.conf:
kld_list="usbhid"
Turning this module on from /boot/loader.conf won't work. Once...
Hello all. I'm on a relatively fresh installation of FreeBSD 13.0 which, to my knowledge, supports PS4 controllers. I've tested Citra and everything works perfectly as far as 3DS emulation is concerned. PSP emulation is a completely different story however. PPSSPP recognises the analogue stick...
What is the best option for gameport on a FreeBSD system?
The two ways to go that I can see are either an old PCI sound card with gameport, or a USB-gameport converter.
I also have a PCI bracket with a gameport on it, that is on a cable that goes to a 16-pin header, but my motherboard does not...
Hello :
I am trying to configure a bluetooth gamepad on FreeBSD 13.0, specifically an 8Bitdo SF30, basically a clone of the classic SNES controller. I have not found any information regarding this gamepad in this forum.
I have configured , hcsecd and bthidd successfully, actually the...
Hey Guys!
I created Live CD Images that can be written to a >= 5GB USB stick and be booted from on almost any 64-bit Intel based computer. It supports both Legacy BIOS boot for older machines and UEFI boot for newer machines. It contains FreeBSD 13.0-RELEASE along with Xorg-minimal. When it is...
Hello everyone,
I am fairly new to FreeBSD and I use it successfully as my OS of choice for the small VPS project I have.
Since I want to get away from Windows in my home in the near future, I am currently testing the viability of FreeBSD as my Desktop OS as well.
At the moment I have it on my...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.