drm-kmod

Hi, I just installed FreeBSD 14.2 on a PC with an AMD Radeon HD 5450 video card, so tried to load the “radeonkms” kernel module on boot, after installing the drm-kmod pkg (binary), rebooted and the result is that the screen shows “no signal” on boot time, so I can not do anything to see what...

Hello everyone. The problem is that I get a black screen with my Intel Core i5-6400 CPU's integrated graphics chip. Steps to reproduce: FreeBSD 14.2-RELEASE clean install. On one of the latest bsdinstall menus I am asked to install the following firmware package...

I plan to build my first PC with the following characteristiscs: CPU: AMD Ryzen 9 7900X3D 4.4 GHz 12-Core Processor Motherboard: Gigabyte B650 GAMING X AX V2 ATX AM5 Motherboard Memory: Corsair Vengeance 32 GB (2 x 16 GB) DDR5-6000 CL30 Memory Storage: Samsung 990 Pro 2 TB M.2-2280 PCIe 4.0 X4...

Hello all, This is my first time posting here, so sorry if I'm not doing this right. I've installed FreeBSD 14.0-RELEASE on an Asus Viviobook S laptop with an Intel i7-12700H CPU (uses an Alder Lake-P iGPU). So far I've run into some major issues getting the iGPU to work. Specifically, I just...

Hi, all I have a very odd issue under FreeBSD, where my dock's DVI output is not detected, however VGA works great and S-Video is detected fine. The DVI works perfectly fine under Linux -- at least from what I saw, I used it mostly for testing. Though, it would only display under X, and it...

Dear netizens ， I tried to install drm-kmod on FreeBSD 14.0-RELEASE, FreeBSD 13.2-RELEASE, FreeBSD 15.0-CURRENT to drive my AMD Radeon RX 5700 XT, but failed, outputting the following error during loading the amdgpu module. I followed Wiki strictly and installed drm-kmod either from pkg or...

So I installed FreeBSD (14.0-RELEASE-p1 FreeBSD 14.0-RELEASE-p1 #1 releng/14.0-n265385-305be1f36b3e) on a used laptop I managed to acquire recently (https://www.msi.com/Laptop/Katana-GF76-11UX/Specification); I was surprised, actually, how smoothly everything went during the installation; The...

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=274770 So I've been having these issues since a few weeks now where my FreeBSD restarts and crashes with some GPU errors and I was wondering if anyone else was suffering the same problems? Solved by installed graphics/drm-61-kmod from ports in...

I followed the guide by Astyle sienna_cichlid-driver.86670 completely. However, I only get kernel modesetting enabled in dmesg and I am stuck using the scfb xorg driver. I have installed drm-510-kmod and gpu-firmware-amd-kmod-sienna-cichlid. Everything appears to be installed correctly and in...

https://github.com/amshafer/nvidia-driver

Hello dear FreeBSD community, I would ask of you a little bit of help in getting Xorg to work with amdgpu. The setup: FreeBSD 14-CURRENT on amd64 architecture (would use RELEASE if it turns out there are no GPU compatibility issues) GPU AMD Radeon RX 6600 (Navi 23) Monitor connected via...

link_elf_obj: symbol ppsratecheck undefined. linker_load_file: /boot/modules/i915kms.ko unsupported file type What I did: Latest sources built: - kernel - @world - Xorg -xf86-Video-intel - drm-kmod latest from GitHub. Intel 6th Generation VGA Adapter?! Liz

Hi there, I'm hoping someone can help me. X won't start on my netbook any more for some reason. I suspect it may have happened after I updated the packages a week or so ago as I an't think of any other change I made that could have caused this. Fatal server error: [ 52.530] (EE) Caught signal...

Why does FreeBSD do not have that yet? The other day I installed FreeBSD on a Raspberry PI 3 and it works like a charm, but these 2 important features are missing. Why? All Linuxes seem to have it, even NetBSD has it. Why is FreeBSD lacking behind in this? Such a pity...

Hello everyone. I recently installed freeBSD on my VMware virtual machine and then I installed both drm-kmod and xf86-video-vmware drivers. according what I've read here : https://reviews.freebsd.org/D20153 I should load vmwgfx, but I don't have such module or anything in my freeBSD kernel...

Hello, I've already posted here about this problem, but I thought I'd make another post in a different category since I don't think it's a problem with peripherals; rather, it is a problem with the refactored drm-kmod-and-friends ports. I hope that's allright! ☺️ I am on a laptop, specifically...

New: graphics/drm-54-kmod graphics/drm-510-kmod https://github.com/freebsd/freebsd-ports/commit/fae9e49dd63f411983cc9a7f62f0fa8418797b35

I’m trying to get X working on a bare metal desktop machine. I followed the amdgpu documentation, and verified that the kernel module gets loaded (though there is only one line of output, but I’ve seen multiple for different chipsets in some other threads on this forum with slightly older...

A fresh 13.0-RELEASE-p6 installation with graphics/drm-kmod added as a package: # dmesg | grep drm drmn0: <drmn> on vgapci0 [drm] i915.alpha_support is deprecated, use i915.force_probe=9a49 instead vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io [drm]...

The problem is I can start X with startx, but if I quit, the screen just goes black. I does not show TTY then. I own a thinkpad t440p. I run FreeBSD 12.2. My Xorg log https://pastebin.com/LK8RpqNL My /var/log/messages https://pastebin.com/51n3PH6L