bhyve networking

Hi there. I've created a Alpline VM using Bhyve. I'm using WLAN0 so I am using NAT. My problem is the host and VM can ping each other but the VM can't see the Internet. I've setup the network with: ifconfig bridge create name natif up ifconfig tap0 create up ifconfig natif addm tap0 ifconfig...

Hello. I am starting to explore bhyve on this old hardware: hm.model: Intel(R) Pentium(R) CPU G645 @ 2.90GHz ram: 4GB ada0: ATA8-ACS SATA 3.x device root is on ZFS i have inslalled 3 VMs on this machine: 1) FreeBSD 14 (UFS) 2) OpenBSD 7.4 3) Debian 12 All have same parameters: 20GB...

Hello Unfortunately, due to a lack of suitable real hardware at the moment, I can't try it out myself or experiment, and so far I haven't found the necessary information to answer the following question: I want to set up a FreeBSD 14 host running various containers and virtual machines. I...

Hi, Host machine: FreeBSD 14.0 Got two bhyve VMs; OpenBSD 7.4 VM and FreeBSD 14 VM. Tried to have a network test from host machine to both VMs with iperf3, the results were interesting. From host machine to FreeBSD VM: FreeBSD VM brings a speed of; Transfer: 7.07 GBytes - Bitrate: 6.08...

Hi all, today I've learned and been reading about VETHER(4). Virtual ethernet interface on FreeBSD, wanted to try it for my VMs networking, activated it as such; pkg install -y net/vether-kmod kldload if_vether ifconfig vether0 create ifconfig vether0 10.0.0.1/24 up My VMs currently are...

I'm trying to find out if these 2 networking cards are compatible with FreeBSD. Specifically, I need bhyve to "passthru" them into a guest VM (either FreeBSD or OpenBSD). 10G Ethernet card Wi-fi 6E card I went through the hardware list and found something "TP-Link" but it does not state the...

Hey guys, well, here is the whole tale: https://forums.FreeBSD.org/threads/vm-bhyve-no-network-connection-from-guest.60123/post-611040 And here is the tl;dr: Got into freebsd these days, freshinstall I dont know much about networking No firewall (pf) and anything No nat Followed up the...

I have setup srv-io on mce(4) with a VF mce2: PF { device: "mlx5_core0"; num_vfs: 8; } DEFAULT { passthrough: true; } VF-0 { This interface is added to a bridge. mce2: flags=8963<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500...

I want to tryout virt-manager with bhyve. But it doesn't recognize the if_tap module. {beastie} @ FreeBaSeD-T430 > /home/beastie → kldstat -v | grep if 398 if_lo 402 if_vlan 401 if_tap 400 if_tun 399 if_tuntap 397 if_gif 99...

Hi friends, I decided to use FreeBSD as a daily and it has been great so far (figured out lots on my own with some help from this great community of course!). But I have something that has me tearing out my hair - I have VM's on bhyve and they run beautifully but for one thing: networking. I...

I am using vm-bhyve to manage VM's, I create a switch with something like vm switch create -i igb0 public all works fine as expected but now I would like to create VM's in another network segment the one I can only access via VLAN, the problem is that I have only Wi-Fi and can't send the vlan...

Is it possible to add another virtio-net i/f to an existing bhyve vm? If so then how is it done?

I'm using vm-bhyve to manage. I created a switch as: vm switch create -n 2000 -i bge0 b2k then assigned an ip to the interface created: ifconfig bge0.2000 10.1.1.1 then assigned this bridge to my vm. the vm has no vlan configured. from Inside the VM: I can ping 10.1.1.1 (the hypervisor...

So I just need virtualization working with a graphical setup and network. I tried: FreeBSD host with VBox FreeBSD host with Bhyve VM-Bhyve Long history short: with VBox the vm's don't even boot, just a black screen. And with bhyve (any setup), everything works fine beside network. I'm using a...

Hey everyone! I am trying to set up a Linux VM using bhyve for the purpose of running docker on my FreeBSD laptop (which is essential to have due to my development workflow). However when setting up a Linux VM using either Debian or Alpine images, I am unable to get the network working properly...

Dear Round, to reach a Bhyve VM i can observer that the RTT/latency is sometimes increasing to more then 100ms, but i'm not able to see why 64 bytes from 192.168.1.1: icmp_seq=530 ttl=64 time=0.703 ms 64 bytes from 192.168.1.1: icmp_seq=531 ttl=64 time=0.418 ms 64 bytes from 192.168.1.1...

I'm using vm to manage virtual machines under FreeBSD-13.0. Start/stop of vm causes this: Jul 3 23:33:15 proviant kernel: tap0: link state changed to DOWN Jul 3 23:33:16 proviant kernel: igb0: link state changed to DOWN Jul 3 23:33:16 proviant kernel: gsm: link state changed to DOWN Jul 3...

Hi there, currently I have a FreeBSD 12.3 Server for a school project. The goal of this project is to create a website from which you can create virtual machines. This works atm. The other goal of the project is to create bhyve switches with vlan id's so that the machines with the same vlan id...

Hello, all! I have an interesting setup that I'm hoping to get a little bit of help with. Before I start: please yell at me if some of my formatting is wonky-- I'm used to markdown, but not so much the styling that the FreeBSD Forums asks for, so if I've done something that needs to be...

Hi guys, I'm setting a new bhyve server, which is working flawlessly except for one machine not having access to internet, I can't figure out why...I'm using vm-bhyve for quite a while now with no problems at all.... I just can't understand why it's not working... I have some VMs working fine...