ahci

Hi All, Look like I'm last user of BananaPI M1 with Allwinner A20 and embeded SATA. Somewhere between revisions 343862 (last working I have) and 370066 (not working I'm trying to use) is lost ahci channel 0. I'm trying to report as much as possible in bug 251330 with no luck. It look like some...

Hello, I have an old IBM ThinkPad G40 with an mSATA to IDE adapter so I could use an SSD in the machine. The installation went just fine. However, when I boot the machine (from the drive), it says "Operating System Not Found". I'm not sure if this is related, but the BIOS does not have...

I have had on my MARVELL 88SE9230 card the following: Oct 18 05:14:54 constance kernel: (ada5:ahcich7:0:0:0): Error 5, Periph was invalidated Oct 18 05:14:54 constance kernel: (ada5:ahcich7:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 c8 3e ae 40 07 01 00 00 00 00 Oct 18 05:14:54 constance kernel...

I’m having a problem with eSata cards and AHCI on a FreeBSD 11.0 RELEASE test box. I’ve been running a generic dual port eSata card from StarTech, with a 4 bay Mediasonic (port multiplier supported) enclosure on one port and a single bay generic enclosure on the other. Everything has worked...

I have a Veriton M421G and i'm currently trying to install FreeBSD on it. I tried both 10.3 and 11.0, but both have failed to install, but 10.3 at least gave me a shell. The following error repeats time after time: http://oscomp.hu/depot/freebsd_installer_error.jpg I tried to set SATA mode in...

Hi, This evening I've just upgraded my FreeBSD 10.0-RELEASE machine to 10.2-RELEASE. The boot drive for this machine is a spinning-rust HD in an eSATA enclosure connected to a PCIe eSATA card (ASMedia ASM1062-based). This had been running perfectly in 10.0-RELEASE. However, since the...