acpi

Hi everyone, I've recently installed version 14.1 on my ThinkPad W520 and noticed an odd issue with the suspend function when closing the lid. Specifically, the laptop doesn't enter suspend mode when the lid is closed, but it immediately suspends once the lid is opened. After a quick...

Hi getting a couple of errors on my Dell XPS 15 (7590) 2019 Freebsd 14.1 p2 https://dl.dell.com/topicspdf/xps-15-7590-laptop_users-guide_en-us.pdf freebsd root config files https://github.com/NapoleonWils0n/freebsd-root-xps i have 2 errors 1 - ACPI Warning from dmesg doas dmesg ACPI...

Hello. As a continuation of bug #278941, I decided to create a new bug report, because... the problem is broader in nature. # uname -a FreeBSD home 13.2-RELEASE-p11 FreeBSD 13.2-RELEASE-p11 releng/13.2-n254665-f5ac4e174fdd MYGENERIC amd64 I work with bhyve virtual machines via vm-bhyve. But I...

Hello everyone, I have just got a new laptop (HP 14-dq0052dx) and trying to install FB 14.0-release. But during installation and after booting into newly installed system I got acpi_ec0: EcCommand: no response to 0x84 acpi_ec0: EcCommand: no response to 0x84 acpi_ec0: GPE query failed...

Hi, all I have a very odd issue under FreeBSD, where my dock's DVI output is not detected, however VGA works great and S-Video is detected fine. The DVI works perfectly fine under Linux -- at least from what I saw, I used it mostly for testing. Though, it would only display under X, and it...

The Environment: Dell Latitude E5420 laptop, from 2011, latest BIOS (A14), 8gb RAM, Intel Core i5-2430M processor FreeBSD AMD64 RELEASE 14.0-p4, standard kernel. The Issue: The following message appears at boot: ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object...

Dear community, I have a Lenovo Laptop T470 which runs FreeBSD-13,2p3-RELEASE. The device has a row of function keys F1 to F12. With an additional simultaneous Fn key press they provide special functions as XF86AudioRaiseVolume, XF86MonBrightnessDown, XF86Favorites and more. The default FreeBSD...

Hi, I would like to use the AMC6821 I2C fan controller that came on my SolidRun HoneyComb LX2 (NXP LX2160) board, but it does load properly in FreeBSD (13.2-RELEASE). I can only see it with devinfo: What do you think could be needed to get it to work properly? Thank you!

I compiled acpi and am trying to boot with it in order to fix some weird kernel spam in the console. acpi_tz0: _CRT value is absurd, ignored (256.1C) I constantly get this type of message and overwrite the output in the tty. My laptop tolerates this: HP Compaq nx6320 I read this...

I have recently upgraded to FreeBSD-13.0 with KDE Plasma from 12.2. Before, in Gnome shutting down button worked as it is intended to be. But, after the upgrade pressing shutdown button or shutdown -p now --> system shuts down; 3-4 seconds later restarts. This is a persistent behaviour after...

HP 2012 120W Advanced Docking Station with DisplayPort x2, each connected to a Philips 271P4QPJKEB/00. HP EliteBook 8570p | <https://bsd-hardware.info/?computer=6fbb1f806232> % sysctl hw.acpi.lid_switch_state hw.acpi.lid_switch_state: NONE % I dock the notebook then, without opening the...

Hi, How could I try and debug, and hopefully fix, the ACPI tables dumped by acpidump? If I run acpidump -t, I get: ... Type=INT Override BUS=0 IRQ=9 INTR=9 Flags={Polarity=active-lo, Trigger=level} */ acpidump: RSDT entry 21 (sig SSDT) is corrupt /*...

Hello to everyone. It's again me. I'm trying to understand what are the statement that I should put into the right configuration files to disable totally the acpi,since it seems that it is needed to boot the cdrom with freebsd with qemu and kvm. (for more informations about this,give a look at...

I did some testing and executed a "# poweroff" on the host system. Judging on the speed that the machine shutdown, I don't think the bhyve VMs went through a graceful shutdown. Is there any way to tell bhyve VMs to gracefully shutdown? (I think other virtualizers such as VirtualBox has...

Not sure this is the correct forum to ask this question, but i'm having a heck of time figuring out how to remove the suspend options in the leave menu of kde5 plasma. I'm finding a lot of varying information about polkit stuff which i haven't worked with before, but everything I've tried...

Hi, My laptop is a dell latitude 7240 with a Haswell cpu. Mate Desktop is installed. My goal is to get the “fn” working to change the screen brightness. I installed https://www.freshports.org/graphics/intel-backlight and I can change the screen brightness by entering ,for.e.g...

I've been using FreeBSD for a decade on servers and infrastructure. Last weekend I thought it's time to give it a chance as a desktop OS. For this, I've been installing FreeBSD 12.1 on my old Lenovo Thinkpad X1 Carbon (3rd gen). I managed to install the base system, get wifi to work, have i3...

Hi all, I know this is a tricky one to solve but I'd be interested to know how I can debug this further, or at a minimum, just stop the machine from suspending on it's own as it's impossible to recover from it once it happens without a power cycle. Disablig ACPI completly with a boot hint...

I fixed an ACPI problem with an old motherboard. Here, I document the steps I used to repair it: Trying FreeBSD 12.0 on an old Pentium 4 machine, with Intel D915GAV motherboard, latest BIOS version. Everything seems to be working OK except that I have an ACPI error report in dmesg on boot...

Hello, I'm new to FreeBSD and I tried to install it on my Acer Aspire E17 laptop, but I could not start the installation process, due to the following error : acpi_ec0: EcCommand: no response to 0x84 The message is displayed on a new line every second, which gives the following screen : I...